3530 Special wood chisel, swedish type
Blade forged from high-alloy tool steel, special heat treatment, thereby fine grain texture in the microstructure, polished surface leads to the finest cutting edge and maximum edge retention. The smooth finish reduces the effort of sharpening.
Handle: Selected white beechwood, strong corrosion resistant ferrules at the front and at the end of the handles, shock absorbing bounce leather washer between handle and blade.
| Item No | Designation | Standard | Weight | Length | Blade length | Handle length 2 | Blade width (Table) |
|---|---|---|---|---|---|---|---|
| 353001 | Special wood chisel, swedish type 4 mm | DIN 3139 | 70 g | 237 mm | 120 mm | 117 mm | 4 mm |
| 353002 | Special wood chisel, swedish type 6 mm | DIN 3139 | 70 g | 237 mm | 120 mm | 117 mm | 6 mm |
| 353003 | Special wood chisel, swedish type 8 mm | DIN 3139 | 80 g | 237 mm | 120 mm | 117 mm | 8 mm |
| 353004 | Special wood chisel, swedish type 10 mm | DIN 3139 | 90 g | 239 mm | 122 mm | 117 mm | 10 mm |
| 353005 | Special wood chisel, swedish type 13 mm | DIN 3139 | 100 g | 244 mm | 125 mm | 119 mm | 13 mm |
| 353006 | Special wood chisel, swedish type 16 mm | DIN 3139 | 110 g | 244 mm | 125 mm | 119 mm | 16 mm |
| 353007 | Special wood chisel, swedish type 18 mm | DIN 3139 | 140 g | 254 mm | 129 mm | 125 mm | 18 mm |
| 353008 | Special wood chisel, swedish type 20 mm | DIN 3139 | 150 g | 256 mm | 131 mm | 125 mm | 20 mm |
| 353009 | Special wood chisel, swedish type 24 mm | DIN 3139 | 180 g | 267 mm | 134 mm | 133 mm | 24 mm |
| 353010 | Special wood chisel, swedish type 26 mm | DIN 3139 | 200 g | 269 mm | 136 mm | 133 mm | 26 mm |
| 353011 | Special wood chisel, swedish type 30 mm | DIN 3139 | 230 g | 279 mm | 141 mm | 138 mm | 30 mm |
| 353012 | Special wood chisel, swedish type 35 mm | DIN 3139 | 300 g | 287 mm | 149 mm | 138 mm | 35 mm |
| 353013 | Special wood chisel, swedish type 40 mm | DIN 3139 | 400 g | 295 mm | 157 mm | 138 mm | 40 mm |
| 353022 | Special wood chisel, swedish type 12 mm | DIN 3139 | 100 g | 244 mm | 125 mm | 119 mm | 12 mm |
| 353024 | Special wood chisel, swedish type 14 mm | DIN 3139 | 110 g | 244 mm | 125 mm | 119 mm | 14 mm |
| 353026 | Special wood chisel, swedish type 22 mm | DIN 3139 | 170 g | 257 mm | 132 mm | 125 mm | 22 mm |
| 353028 | Special wood chisel, swedish type 28 mm | DIN 3139 | 210 g | 272 mm | 139 mm | 133 mm | 28 mm |
| 353030 | Special wood chisel, swedish type 32 mm | DIN 3139 | 250 g | 280 mm | 142 mm | 138 mm | 32 mm |
Manufacturer information (GPSR)
MANUFACTURER ACCORDING TO THE EU GENERAL PRODUCT SAFETY REGULATION (GPSR)
STUBAI ZMV GmbH
Dr. Kofler Straße 1
A-6166 Fulpmes
Phone: +43 5225 6960 211
Email: office@stubai.com
Safety Instructions for Chisels
General Information:
• Suitable tool: Always use chisels specifically designed for the respective task. Using an unsuitable chisel increases the risk of accidents and can make the work more difficult.
• Chisels may only be used by persons with limited physical, sensory or mental abilities, or lacking experience and/or knowledge, if they are supervised by a person responsible for their safety, have received instructions on how to use chisels, and have understood the resulting hazards.
• Children may only use chisels if they are over 8 years old and are supervised by a person responsible for their safety, have received instructions on how to use chisels, and have understood the resulting hazards.
• Keep packaging films away from children; risk of suffocation!
Intended Use:
• Safety is only ensured when the tool is used as intended. Use the tool exclusively for its designated purpose. Incorrect use may lead to tool breakage and injuries.
Improper Use:
• Use as a lever is not permitted.
Inspection Before Use:
• Ensure tool integrity: Check all chisels before use for visible damage such as cracks in the handle, breaks or loose parts.
• Do not use damaged chisels: Defective chisels must not be used, as they increase the risk of accidents.
Personal Protective Equipment:
• Wear safety goggles: Use safety goggles to protect yourself from chipping material.
• Hand protection: Wear robust work gloves that provide a secure grip and protect against skin injuries.
• Safety footwear: Wear safety shoes with a metal or plastic toe cap to protect your toes.
Specific Safety Instructions During Use:
• Mind the sharpness: Chisels are very sharp and must be handled with extreme caution. Always follow recommended safety precautions to avoid injuries.
• Secure grip: Ensure that the handle of the chisel is firm and non-slip to maintain a secure hold during work. An unstable grip may cause the tool to slip and lead to injuries.
• Sharp edge: Always be aware that the cutting edge of the chisel is extremely sharp. Wear suitable protective gloves when working with chisels to protect your hands from cuts.
• Secure the workpiece: Fix the workpiece securely and stably to prevent movement during processing. An unstable hold may cause the chisel to slip and lead to injuries.
• Keep fingers and hands away: Ensure that your hands or fingers are never near the cutting edge, as slipping may cause severe cuts.
• Slow, controlled movements: Guide the chisel slowly and in a controlled manner. Avoid jerky movements to fully benefit from the sharpness and minimize the risk of slipping.
• Avoid overloading: Excessive pressure may cause the chisel to slip or move uncontrollably, leading to injuries. Use only the necessary amount of pressure.
• Avoid overstressing: Ensure that the chisel is not subjected to excessive force, as this may cause material fatigue and breakage.
Maintenance, Care and Storage:
• Regular inspection: Check the chisel regularly for wear or damage. A worn or damaged chisel may impair work quality and increase the risk of injury.
• Cleaning after use: After each use, clean the chisel thoroughly to remove residues. Dry the tool well to prevent rust formation.
• Sharpening: If the chisel becomes dull, sharpen it according to the manufacturer’s instructions. Use suitable sharpening tools and precautions to avoid damaging the tool and to maintain sharpness safely.
• Rust protection: Protect metal parts from moisture to prevent rust. Apply rust protection if necessary.
• Storage: Store tools out of reach of children and persons with limited physical, sensory or mental abilities, in a safe, dry place such as a toolbox or tool wall to prevent accidents and damage.
Special Notes:
• Eye protection: When working with chisels, especially on hard wood or tough material, it is recommended to wear safety goggles to protect your eyes from splinters or flying particles.
• Avoid improvisation: Use chisels exclusively for their intended purpose. Using tools for unsuitable applications may lead to tool breakage or injuries.
• Transport: Ensure that tools are securely fastened during transport and that sharp edges are protected to avoid injuries.
This text has been partially translated with the support of AI technology.
STUBAI ZMV GmbH
Dr. Kofler Straße 1
A-6166 Fulpmes
Phone: +43 5225 6960 211
Email: office@stubai.com
Safety Instructions for Chisels
General Information:
• Suitable tool: Always use chisels specifically designed for the respective task. Using an unsuitable chisel increases the risk of accidents and can make the work more difficult.
• Chisels may only be used by persons with limited physical, sensory or mental abilities, or lacking experience and/or knowledge, if they are supervised by a person responsible for their safety, have received instructions on how to use chisels, and have understood the resulting hazards.
• Children may only use chisels if they are over 8 years old and are supervised by a person responsible for their safety, have received instructions on how to use chisels, and have understood the resulting hazards.
• Keep packaging films away from children; risk of suffocation!
Intended Use:
• Safety is only ensured when the tool is used as intended. Use the tool exclusively for its designated purpose. Incorrect use may lead to tool breakage and injuries.
Improper Use:
• Use as a lever is not permitted.
Inspection Before Use:
• Ensure tool integrity: Check all chisels before use for visible damage such as cracks in the handle, breaks or loose parts.
• Do not use damaged chisels: Defective chisels must not be used, as they increase the risk of accidents.
Personal Protective Equipment:
• Wear safety goggles: Use safety goggles to protect yourself from chipping material.
• Hand protection: Wear robust work gloves that provide a secure grip and protect against skin injuries.
• Safety footwear: Wear safety shoes with a metal or plastic toe cap to protect your toes.
Specific Safety Instructions During Use:
• Mind the sharpness: Chisels are very sharp and must be handled with extreme caution. Always follow recommended safety precautions to avoid injuries.
• Secure grip: Ensure that the handle of the chisel is firm and non-slip to maintain a secure hold during work. An unstable grip may cause the tool to slip and lead to injuries.
• Sharp edge: Always be aware that the cutting edge of the chisel is extremely sharp. Wear suitable protective gloves when working with chisels to protect your hands from cuts.
• Secure the workpiece: Fix the workpiece securely and stably to prevent movement during processing. An unstable hold may cause the chisel to slip and lead to injuries.
• Keep fingers and hands away: Ensure that your hands or fingers are never near the cutting edge, as slipping may cause severe cuts.
• Slow, controlled movements: Guide the chisel slowly and in a controlled manner. Avoid jerky movements to fully benefit from the sharpness and minimize the risk of slipping.
• Avoid overloading: Excessive pressure may cause the chisel to slip or move uncontrollably, leading to injuries. Use only the necessary amount of pressure.
• Avoid overstressing: Ensure that the chisel is not subjected to excessive force, as this may cause material fatigue and breakage.
Maintenance, Care and Storage:
• Regular inspection: Check the chisel regularly for wear or damage. A worn or damaged chisel may impair work quality and increase the risk of injury.
• Cleaning after use: After each use, clean the chisel thoroughly to remove residues. Dry the tool well to prevent rust formation.
• Sharpening: If the chisel becomes dull, sharpen it according to the manufacturer’s instructions. Use suitable sharpening tools and precautions to avoid damaging the tool and to maintain sharpness safely.
• Rust protection: Protect metal parts from moisture to prevent rust. Apply rust protection if necessary.
• Storage: Store tools out of reach of children and persons with limited physical, sensory or mental abilities, in a safe, dry place such as a toolbox or tool wall to prevent accidents and damage.
Special Notes:
• Eye protection: When working with chisels, especially on hard wood or tough material, it is recommended to wear safety goggles to protect your eyes from splinters or flying particles.
• Avoid improvisation: Use chisels exclusively for their intended purpose. Using tools for unsuitable applications may lead to tool breakage or injuries.
• Transport: Ensure that tools are securely fastened during transport and that sharp edges are protected to avoid injuries.
This text has been partially translated with the support of AI technology.
