2450 Hexagon metric socket

Chrome-vanadium-steel, chrome plated, hole for ball bearing. 245019, 245021, 245022, 245024, 245026, 245027, 245030, 245032, 245036, 245038, 245041, 245046, 245050, 245055, 245060,

Item NoDesignationStandardTypeInchWeightLengthWidthHeightWrench size
245019Hexagon metric socket 19 mmDIN 3124, ISO 2725Hexagonal3/4 "174 g51 mm200 mm60 mm19 mm
245021Hexagon metric socket 21 mmDIN 3124, ISO 2725Hexagonal3/4 "180 g51 mm200 mm60 mm21 mm
245022Hexagon metric socket 22 mmDIN 3124, ISO 2725Hexagonal3/4 "200 g51 mm200 mm60 mm22 mm
245024Hexagon metric socket 24 mmDIN 3124, ISO 2725Hexagonal3/4 "210 g51 mm200 mm60 mm24 mm
245026Hexagon metric socket 26 mmDIN 3124, ISO 2725Hexagonal3/4 "230 g51 mm200 mm60 mm26 mm
245027Hexagon metric socket 27 mmDIN 3124, ISO 2725Hexagonal3/4 "230 g51 mm200 mm60 mm27 mm
245030Hexagon metric socket 30 mmDIN 3124, ISO 2725Hexagonal3/4 "290 g51 mm200 mm60 mm30 mm
245032Hexagon metric socket 32 mmDIN 3124, ISO 2725Hexagonal3/4 "310 g51 mm200 mm60 mm32 mm
245036Hexagon metric socket 36 mmDIN 3124, ISO 2725Hexagonal3/4 "450 g51 mm200 mm60 mm36 mm
245038Hexagon metric socket 38 mmDIN 3124, ISO 2725Hexagonal3/4 "480 g51 mm200 mm60 mm38 mm
245041Hexagon metric socket 41 mmDIN 3124, ISO 2725Hexagonal3/4 "540 g51 mm200 mm60 mm41 mm
245046Hexagon metric socket 46 mmDIN 3124, ISO 2725Hexagonal3/4 "690 g51 mm200 mm60 mm46 mm
245050Hexagon metric socket 50 mmDIN 3124, ISO 2725Hexagonal3/4 "750 g51 mm200 mm60 mm50 mm
245055Hexagon metric socket 55 mmDIN 3124, ISO 2725Hexagonal3/4 "953 g51 mm200 mm60 mm55 mm
245060Hexagon metric socket 60 mmDIN 3124, ISO 2725Hexagonal3/4 "1091 g51 mm200 mm60 mm60 mm
Manufacturer information (GPSR)
MANUFACTURER ACCORDING TO THE EU GENERAL PRODUCT SAFETY REGULATION (GPSR)
STUBAI ZMV GmbH
Dr. Kofler Straße 1
A-6166 Fulpmes
Phone: +43 5225 6960 211
Email: office@stubai.com
Safety Instructions for Screw Tools (e.g. Screwdriver Bits)
General Information:
• Partially subject to standards DIN 3124, ISO 2725, or DIN 3124, DIN 3120C, ISO 1174-1 or DIN 3120, ISO 1174, D 6.3 or DIN 3121.
• Screw tools may only be used by persons with limited physical, sensory or mental abilities, or lacking experience and/or knowledge, if they are supervised by a person responsible for their safety, have received instructions on how to use screw tools, and have understood the resulting hazards.
• Children may only use screw tools if they are over 8 years old and are supervised by a person responsible for their safety, have received instructions on how to use screw tools, and have understood the resulting hazards.
• Keep packaging films away from children; risk of suffocation!
Intended Use:
• Safety is only ensured when the tool is used as intended. Use screw tools exclusively for their designated purpose. Incorrect use may lead to tool breakage and injuries.
Improper Use:
• Use as a chisel, hammer or lever is not permitted.
Inspection Before Use:
• Ensure tool integrity: Check all screw tools before use for visible damage such as breaks or loose parts.
• Do not use damaged screw tools: Defective screw tools must not be used, as they increase the risk of accidents.
• Observe compatibility: Ensure that the screwdriver bit is compatible with the screwdriver or drill being used. Improper tools may cause slipping, tool breakage or damage.
Personal Protective Equipment:
• Wear safety goggles: Use safety goggles to protect yourself from chipping material.
• Hand protection: Wear robust work gloves that provide a secure grip and protect against skin injuries.
• Safety footwear: Wear safety shoes with a metal or plastic toe cap to protect your toes.
Specific Safety Instructions During Use:
• Ensure a firm connection: Make sure the screwdriver bit is firmly seated in the screwdriver or drill chuck before starting work. A loose bit may slip and cause injuries.
• Turn screws in the correct direction: Always turn the screw in the correct direction to avoid twisting or breaking the bit.
• Avoid overloading: Do not apply excessive pressure to the screw tool. Too much pressure may damage the bit or the screw, preventing proper engagement.
• Handle the tool carefully: Ensure that the screwdriver bit does not fall or come into contact with hard surfaces during handling to avoid damage.
Maintenance, Care and Storage:
• Regular inspection: Check the condition of the screwdriver bit regularly for wear or damage. A worn or damaged bit may impair work and increase the risk of injury.
• Cleaning after use: Screw tools should be cleaned regularly after use to remove dirt or oil residues. Regular cleaning ensures long service life and better tool performance.
• Rust protection: Protect metal parts from moisture to prevent rust. Apply rust protection if necessary.
• Storage: Store screw tools out of reach of children and persons with limited physical, sensory or mental abilities, in a safe, dry place such as a toolbox or tool wall to prevent accidents and damage.
Special Notes:
• Use only with matching screws: Screwdriver bits should only be used with the correct screw types. Using the wrong bit may damage both the bit and the screw material.
• Transport: Ensure that tools are securely fastened during transport and that sharp edges are protected to avoid injuries.
This text has been partially translated with the support of AI technology.