7020 Chisel, skew
This skew chisel is indispensable for parting and for making V-cuts. Also for shaping along the grain.
| Item No | Designation | Wood type | Weight | Length | Width | Handle length 2 | Spare Parts |
|---|---|---|---|---|---|---|---|
| 702012 | Chisel, skew 12 mm | alder | 270 g | 490 mm | 12 mm | 300 mm | Array |
| 702015 | Chisel, skew 15 mm | alder | 320 g | 490 mm | 15 mm | 300 mm | Array |
| 702020 | Chisel, skew 20 mm | alder | 330 g | 490 mm | 20 mm | 300 mm | Array |
| 702025 | Chisel, skew 25 mm | alder | 400 g | 490 mm | 25 mm | 300 mm | Array |
| 702030 | Chisel, skew 30 mm | alder | 470 g | 490 mm | 30 mm | 300 mm | Array |
| 702035 | Chisel, skew 35 mm | alder | 495 g | 490 mm | 35 mm | 300 mm | Array |
Manufacturer information (GPSR)
MANUFACTURER ACCORDING TO THE EU GENERAL PRODUCT SAFETY REGULATION (GPSR)
STUBAI ZMV GmbH
Dr. Kofler Straße 1
A-6166 Fulpmes
Phone: +43 5225 6960 211
Email: office@stubai.com
Safety Instructions for Turning Tools
General Information:
Suitable tool: Always use the turning tool specifically designed for the respective task. Using an unsuitable tool increases the risk of accidents and can make the work more difficult.
Turning tools may only be used by persons with limited physical, sensory or mental abilities, or lacking experience and/or knowledge, if they are supervised by a person responsible for their safety, have received instructions on how to use turning tools, and have understood the resulting hazards.
Children may only use turning tools if they are over 8 years old and are supervised by a person responsible for their safety, have received instructions on how to use turning tools, and have understood the resulting hazards.
Keep packaging films away from children; risk of suffocation!
Intended Use:
Safety is only ensured when the tool is used as intended. Use the turning tool exclusively for its designated purpose. Incorrect use may lead to tool breakage and injuries.
Improper Use:
Use as a lever or chisel is not permitted.
Inspection Before Use:
Ensure integrity: Check turning tools before each use for damage such as cracks, loose parts or rust.
Do not use damaged turning tools: Defective turning tools must not be used and must be taken out of service immediately.
Personal Protective Equipment:
Wear safety goggles: Use safety goggles to protect yourself from chipping material.
Hand protection: Wear robust work gloves that provide a secure grip and protect against skin injuries.
Safety footwear: Wear safety shoes with a metal or plastic toe cap to protect your toes.
Specific Instructions for Turning Tools:
Cutting edge and sharpness:
o Ensure that the cutting edge of the turning tool is always sharp and free from damage. A dull tool makes work more difficult and may result in uneven cutting, increasing the risk of injury.
o Sharpen the turning tool regularly to achieve optimal results and reduce the risk of slipping. Use suitable sharpening tools such as grinding stones or machines.
o Avoid using the tool on hard materials or at incorrect angles, as this may damage the cutting edge.
Handles and handling:
o Ensure that the handle of the turning tool is firm, non-slip and free from cracks or splinters. An unstable handle can lead to uncontrolled movements.
o If necessary, wear gloves to improve grip and protect against splinters. Ensure that gloves do not pose a hazard, such as catching on the workpiece.
Maintenance, Care and Storage:
Regular inspection: Check turning tools regularly for wear or damage. A worn or damaged tool can make work more difficult and increase the risk of injury.
Cleaning after use: Remove wood chips and residues from the cutting edge and handle after each use. Dust and chips can impair functionality and accelerate wear.
Sharpening: Sharpen the turning tool regularly with a suitable abrasive to ensure precise cutting and comfortable handling.
Storage: Store the turning tool in a safe, dry place to prevent rust and damage. A stable storage system or protective cover helps keep the tool in good condition.
Store tools out of reach of children and persons with limited physical, sensory or mental abilities, in a safe, dry place such as a toolbox or tool wall to prevent accidents and damage. Store turning tools out of reach of children and persons with limited physical, sensory or mental abilities, in a safe, dry place such as a toolbox or tool wall to prevent accidents and damage.
Special Notes:
Avoid improvisation: Use the turning tool exclusively for its intended purpose. Using it for unsuitable applications may damage the workpiece or the tool and increase the risk of injury.
Monitoring during operation: Regularly check the tool and the workpiece during turning to ensure that no unexpected hazards arise. Especially with larger workpieces, frequent inspection of the cutting edge is important to prevent accidents.
Transport: Ensure that turning tools are securely fastened during transport and that sharp edges are protected to avoid injuries.
This text has been partially translated with the support of AI technology.
STUBAI ZMV GmbH
Dr. Kofler Straße 1
A-6166 Fulpmes
Phone: +43 5225 6960 211
Email: office@stubai.com
Safety Instructions for Turning Tools
General Information:
Suitable tool: Always use the turning tool specifically designed for the respective task. Using an unsuitable tool increases the risk of accidents and can make the work more difficult.
Turning tools may only be used by persons with limited physical, sensory or mental abilities, or lacking experience and/or knowledge, if they are supervised by a person responsible for their safety, have received instructions on how to use turning tools, and have understood the resulting hazards.
Children may only use turning tools if they are over 8 years old and are supervised by a person responsible for their safety, have received instructions on how to use turning tools, and have understood the resulting hazards.
Keep packaging films away from children; risk of suffocation!
Intended Use:
Safety is only ensured when the tool is used as intended. Use the turning tool exclusively for its designated purpose. Incorrect use may lead to tool breakage and injuries.
Improper Use:
Use as a lever or chisel is not permitted.
Inspection Before Use:
Ensure integrity: Check turning tools before each use for damage such as cracks, loose parts or rust.
Do not use damaged turning tools: Defective turning tools must not be used and must be taken out of service immediately.
Personal Protective Equipment:
Wear safety goggles: Use safety goggles to protect yourself from chipping material.
Hand protection: Wear robust work gloves that provide a secure grip and protect against skin injuries.
Safety footwear: Wear safety shoes with a metal or plastic toe cap to protect your toes.
Specific Instructions for Turning Tools:
Cutting edge and sharpness:
o Ensure that the cutting edge of the turning tool is always sharp and free from damage. A dull tool makes work more difficult and may result in uneven cutting, increasing the risk of injury.
o Sharpen the turning tool regularly to achieve optimal results and reduce the risk of slipping. Use suitable sharpening tools such as grinding stones or machines.
o Avoid using the tool on hard materials or at incorrect angles, as this may damage the cutting edge.
Handles and handling:
o Ensure that the handle of the turning tool is firm, non-slip and free from cracks or splinters. An unstable handle can lead to uncontrolled movements.
o If necessary, wear gloves to improve grip and protect against splinters. Ensure that gloves do not pose a hazard, such as catching on the workpiece.
Maintenance, Care and Storage:
Regular inspection: Check turning tools regularly for wear or damage. A worn or damaged tool can make work more difficult and increase the risk of injury.
Cleaning after use: Remove wood chips and residues from the cutting edge and handle after each use. Dust and chips can impair functionality and accelerate wear.
Sharpening: Sharpen the turning tool regularly with a suitable abrasive to ensure precise cutting and comfortable handling.
Storage: Store the turning tool in a safe, dry place to prevent rust and damage. A stable storage system or protective cover helps keep the tool in good condition.
Store tools out of reach of children and persons with limited physical, sensory or mental abilities, in a safe, dry place such as a toolbox or tool wall to prevent accidents and damage. Store turning tools out of reach of children and persons with limited physical, sensory or mental abilities, in a safe, dry place such as a toolbox or tool wall to prevent accidents and damage.
Special Notes:
Avoid improvisation: Use the turning tool exclusively for its intended purpose. Using it for unsuitable applications may damage the workpiece or the tool and increase the risk of injury.
Monitoring during operation: Regularly check the tool and the workpiece during turning to ensure that no unexpected hazards arise. Especially with larger workpieces, frequent inspection of the cutting edge is important to prevent accidents.
Transport: Ensure that turning tools are securely fastened during transport and that sharp edges are protected to avoid injuries.
This text has been partially translated with the support of AI technology.
