7044 Holder rod set with joint without handle
Our multi-functional changing system can be used with our classic boring tools, such as the ring and ball cutter, in addition to our new DWS plates. With adjustable joint pieces, suitable for lengthwise & crosswise lumber work as well as for epoxy resin processing. Delivered with matching allen key.
| Item No | Designation | Weight | Length | Number of parts |
|---|---|---|---|---|
| 704423 | Holder rod set with joint without handle | 360 g | 310 mm | 2 Teile |
Set Items
Manufacturer information (GPSR)
MANUFACTURER ACCORDING TO THE EU GENERAL PRODUCT SAFETY REGULATION (GPSR)
STUBAI ZMV GmbH
Dr. Kofler Straße 1
A-6166 Fulpmes
Phone: +43 5225 6960 211
Email: office@stubai.com
Safety Instructions for the DWS Turning Exchange System
General Information:
Suitable tool: Always use the turning tool specifically designed for the respective task. Using an unsuitable turning tool increases the risk of accidents and can make the work more difficult.
The DWS Turning Exchange System may only be used by persons with limited physical, sensory or mental abilities, or lacking experience and/or knowledge, if they are supervised by a person responsible for their safety, have received instructions on how to use the DWS Turning Exchange System, and have understood the resulting hazards.
Children may only use the DWS Turning Exchange System if they are over 8 years old and are supervised by a person responsible for their safety, have received instructions on how to use the DWS Turning Exchange System, and have understood the resulting hazards.
Keep packaging films away from children; risk of suffocation!
Intended Use:
Safety is only ensured when the tool is used as intended. Use the turning tool exclusively for its designated purpose. Incorrect use may lead to tool breakage and injuries.
Improper Use:
Use as a lever or chisel is not permitted.
Inspection Before Use:
Ensure integrity: Check the turning tools before each use for damage such as cracks, loose parts or rust.
Do not use damaged turning tools: Defective turning tools must not be used and must be taken out of service immediately.
Personal Protective Equipment:
Wear safety goggles: Use safety goggles to protect yourself from chipping material.
Hand protection: Wear robust work gloves that provide a secure grip and protect against skin injuries.
Safety footwear: Wear safety shoes with a metal or plastic toe cap to protect your toes.
Hearing protection: Wear hearing protection to protect yourself from noise.
Specific Instructions for Components of the DWS Turning Exchange System:
Exchangeable knives and blades:
o Regularly check the knives for wear or damage. Sharp knives ensure precise work, while dull or damaged knives increase the risk of slipping and inaccurate cuts.
o Ensure that the knives sit firmly in the holder and cannot loosen during operation.
o Make sure the blades are sharpened regularly to maximize efficiency and extend the tools lifespan.
Holders and mounts:
o Check holders and mounts for damage or loose connections. Any loose connection can lead to unsafe use of the system and may damage the workpiece.
o Ensure that the holders are properly attached to the lathe before starting work. Loose or unsecured holders can destabilize the entire system.
o Use only manufacturer?recommended components and accessories to ensure safe and effective use of the system.
Exchange mechanism:
o Check the mechanism used to change tools within the system. Ensure it operates smoothly and has no blocked parts. A jammed or blocked mechanism can lead to dangerous handling and inaccurate work.
o Follow the manufacturers instructions carefully when changing tools to avoid injuries.
Maintenance, Care and Storage:
Cleaning after use: Clean the DWS Turning Exchange System thoroughly after each use to remove residues such as wood, resin or other materials that could impair the systems functionality.
Sharpening: Keep the knives sharp to ensure precise and safe work. A dull knife requires more force and can make controlling the workpiece more difficult.
Storage: Store the system in a dry and secure place to prevent rust or damage from impact. Use a protective cover or storage system if necessary to protect knives and holders. Store turning tools out of reach of children and persons with limited physical, sensory or mental abilities, in a safe, dry place such as a toolbox or tool wall to prevent accidents and damage.
Special Notes:
Avoid improvisation: Use the DWS Turning Exchange System only for its intended purpose. Do not attempt to modify the system or use it for unsuitable applications, as this may lead to accidents or damage.
Monitoring during operation: Regularly check the condition of the system, especially during extended use, to ensure everything is secure and functioning properly. Early detection of issues can prevent potential hazards.
Transport: Ensure that tools are securely fastened during transport and that sharp edges are protected to avoid injuries.
This text has been partially translated with the support of AI technology.
STUBAI ZMV GmbH
Dr. Kofler Straße 1
A-6166 Fulpmes
Phone: +43 5225 6960 211
Email: office@stubai.com
Safety Instructions for the DWS Turning Exchange System
General Information:
Suitable tool: Always use the turning tool specifically designed for the respective task. Using an unsuitable turning tool increases the risk of accidents and can make the work more difficult.
The DWS Turning Exchange System may only be used by persons with limited physical, sensory or mental abilities, or lacking experience and/or knowledge, if they are supervised by a person responsible for their safety, have received instructions on how to use the DWS Turning Exchange System, and have understood the resulting hazards.
Children may only use the DWS Turning Exchange System if they are over 8 years old and are supervised by a person responsible for their safety, have received instructions on how to use the DWS Turning Exchange System, and have understood the resulting hazards.
Keep packaging films away from children; risk of suffocation!
Intended Use:
Safety is only ensured when the tool is used as intended. Use the turning tool exclusively for its designated purpose. Incorrect use may lead to tool breakage and injuries.
Improper Use:
Use as a lever or chisel is not permitted.
Inspection Before Use:
Ensure integrity: Check the turning tools before each use for damage such as cracks, loose parts or rust.
Do not use damaged turning tools: Defective turning tools must not be used and must be taken out of service immediately.
Personal Protective Equipment:
Wear safety goggles: Use safety goggles to protect yourself from chipping material.
Hand protection: Wear robust work gloves that provide a secure grip and protect against skin injuries.
Safety footwear: Wear safety shoes with a metal or plastic toe cap to protect your toes.
Hearing protection: Wear hearing protection to protect yourself from noise.
Specific Instructions for Components of the DWS Turning Exchange System:
Exchangeable knives and blades:
o Regularly check the knives for wear or damage. Sharp knives ensure precise work, while dull or damaged knives increase the risk of slipping and inaccurate cuts.
o Ensure that the knives sit firmly in the holder and cannot loosen during operation.
o Make sure the blades are sharpened regularly to maximize efficiency and extend the tools lifespan.
Holders and mounts:
o Check holders and mounts for damage or loose connections. Any loose connection can lead to unsafe use of the system and may damage the workpiece.
o Ensure that the holders are properly attached to the lathe before starting work. Loose or unsecured holders can destabilize the entire system.
o Use only manufacturer?recommended components and accessories to ensure safe and effective use of the system.
Exchange mechanism:
o Check the mechanism used to change tools within the system. Ensure it operates smoothly and has no blocked parts. A jammed or blocked mechanism can lead to dangerous handling and inaccurate work.
o Follow the manufacturers instructions carefully when changing tools to avoid injuries.
Maintenance, Care and Storage:
Cleaning after use: Clean the DWS Turning Exchange System thoroughly after each use to remove residues such as wood, resin or other materials that could impair the systems functionality.
Sharpening: Keep the knives sharp to ensure precise and safe work. A dull knife requires more force and can make controlling the workpiece more difficult.
Storage: Store the system in a dry and secure place to prevent rust or damage from impact. Use a protective cover or storage system if necessary to protect knives and holders. Store turning tools out of reach of children and persons with limited physical, sensory or mental abilities, in a safe, dry place such as a toolbox or tool wall to prevent accidents and damage.
Special Notes:
Avoid improvisation: Use the DWS Turning Exchange System only for its intended purpose. Do not attempt to modify the system or use it for unsuitable applications, as this may lead to accidents or damage.
Monitoring during operation: Regularly check the condition of the system, especially during extended use, to ensure everything is secure and functioning properly. Early detection of issues can prevent potential hazards.
Transport: Ensure that tools are securely fastened during transport and that sharp edges are protected to avoid injuries.
This text has been partially translated with the support of AI technology.
