preloader
Tools by
Professionals for Professionals

Woodturning Tools

  • All
  • Carbon Steel Hobby
  • Tools with Alder Wood Handle
  • Tools with Cherrywood Handle

N° 3610 STUBAI Woodturning Chisel Set, 5-pcs

N° 3610 STUBAI Woodturning Chisel Set, 5-pcs Consisting of 1 piece each: 3622 12, 3628 13, 2632 06, 3634 12, 3638 15 with beech wood handles 240 mm with tool roll

N° 3620 STUBAI Chisel without handle, skew

N° 3620 STUBAI Chisel without handle, skew

N° 3622 STUBAI Chisel, skew

N° 3622 STUBAI Chisel, skew High quality carbon steel with excellent edge-holding ability, bevel-edged blade, suited for shaping and finishing

N° 3628 STUBAI Spindle gouge

N° 3628 STUBAI Spindle gouge High quality carbon steel with excellent edge-holding ability, concave shaped blade, for rough shaping

N° 3630 STUBAI Spindle gouge without handle

N° 3630 STUBAI Spindle gouge without handle

N° 3632 STUBAI Parting tools, tapered

N° 3632 STUBAI Parting tools, tapered High quality carbon steel with excellent edge-holding ability, for making deep cuts and for parting off. The tapered profile also reduces the risk of binding in the cut.

N° 3634 STUBAI Scraper, round nose

N° 3634 STUBAI Scraper, round nose High quality carbon steel with excellent edge-holding ability, single rimmed edge. These scrapers should be used with burr on edge.

N° 3636 STUBAI Scraper, pointed

N° 3636 STUBAI Scraper, pointed High quality carbon steel with excellent edge-holding ability, single rimmed edge. These scrapers should be used with burr on edge.

N° 3638 STUBAI Scraper, round/side cut

N° 3638 STUBAI Scraper, round/side cut High quality carbon steel with excellent edge-holding ability, designed for bleinding side walls and bottoms of vessels and undercutting the rims of bowls.

N° 3639 STUBAI Beech-wood handle

N° 3639 STUBAI Beech-wood handle Standard finish, varnished.

N° 5349 STUBAI Sharpening stone for woodturning tools

N° 5349 STUBAI Sharpening stone for woodturning tools Special sharpening stone for HSS-woodturning tools. Optimally used with sharpening oil or distilled water.

N° 5905 STUBAI HSS-spindle gouge, without handle

N° 5905 HSS-spindle gouge, without handle

N° 5905 STUBAI HSS-spindle gouge, without handle

N° 5905 STUBAI HSS-spindle gouge, without handle

N° 5908 STUBAI Roughing-out gouge, heavy duty

N° 5908 STUBAI Roughing-out gouge, heavy duty

N° 5910 STUBAI Bowl gouge without handle

N° 5910 STUBAI Bowl gouge without handle

N° 5920 STUBAI Chisel without handle, skew

N° 5920 STUBAI Chisel without handle, skew

N° 5922 Scraper without handle, round nose

N° 5922 Scraper without handle, round nose

N° 5924 STUBAI Scraper without handle, square end

N° 5924 STUBAI Scraper without handle, square end

N° 5926 STUBAI Scraper without handle, pointed

N° 5926 STUBAI Scraper without handle, pointed

N° 5928 STUBAI Oval-chisel without handle

N° 5928 STUBAI Oval-chisel without handle

N° 5930 STUBAI Scraper without handle, round/ side cut

N° 5930 STUBAI Scraper without handle, round/ side cut

N° 5935 STUBAI Scraper without handle, square/side cut

N° 5935 STUBAI Scraper without handle, square/side cut

N° 5940 STUBAI Captive ring tool without handle, comb.

N° 5940 STUBAI Captive ring tool without handle, comb.

N° 5945 STUBAI Ring tool without handle

N° 5945 STUBAI Ring tool without handle

N° 5950 STUBAI Parting tool without handle, tapered profile

N° 5950 STUBAI Parting tool without handle, tapered profile

N° 5955 STUBAI Parting tool without handle, tapered, milled groove

N° 5955 STUBAI Parting tool without handle, tapered, milled groove

N° 5956 STUBAI Parting tool without handle, square

N° 5956 STUBAI Parting tool without handle, square

N° 5958 STUBAI Parting tool without handle, diamond section

N° 5958 STUBAI Parting tool without handle, diamond section

N° 7005 STUBAI Roughing-out gouge

N° 7005 STUBAI Roughing-out gouge Designed for the initial turning on uneven or square spindle stock to round.

N° 7005 STUBAI Spindle gouge

N° 7005 STUBAI Spindle gouge Almost all curved shapes can te turned and made to a good smooth finish with this tool.

N° 7008 STUBAI Roughing-out gouge, heavy duty

N° 7008 STUBAI Roughing-out gouge, heavy duty This heavy duty gouge is designed for the initial turning on uneven or square spindle stock to round.

N° 7010 STUBAI Bowl gouge, deep fluted

N° 7010 STUBAI Bowl gouge, deep fluted The performance of the tool is particularly important when working against the grain. Our special HSS bowl gouge is far more suitable for this kind of work than conventional gouges. The special shape of this tool allows shavings to be removed quickly and efficiently and prevents the tool from being caught in the wood during turning.

N° 7020 STUBAI Chisel, skew

N° 7020 STUBAI Chisel, skew This skew chisel is indispensable for parting and for making V-cuts. Also for shaping along the grain.

N° 7022 STUBAI Scraper, round nose

N° 7022 STUBAI Scraper, round nose Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7024 STUBAI Scraper, square end

N° 7024 STUBAI Scraper, square end Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7026 STUBAI Scraper, pointed

N° 7026 STUBAI Scraper, pointed Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7028 STUBAI Oval-chisel, skew

N° 7028 STUBAI Oval-chisel, skew Our oval skew chisels are a logical improvement of the skew chisels. We have been producing our HSS oval skew chisels for years. Due to their perfect shape they have in the meantime become an indispensable tool for woodturners. A HSS oval skew chisel has a number of advantages over the standard square chisel: – Because of its oval shape the tool is automatically in the correct cutting position and is therefore safer to use. – The oval form enables the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. – The oval form permits fine work on all round shapes. – Beginners particularly will find it easy to achieve clean cuts with this tool.

N° 7030 STUBAI Scraper, round/side cut

N° 7030 STUBAI Scraper, round/side cut Ideal tool for blending inside curves and curved bottoms of vessels and boxes. Ideal also for undercutting work.

N° 7035 STUBAI Scraper, square/ side cut

N° 7035 STUBAI Scraper, square/ side cut Ideal tool for blending inside squares and square bottoms of boxes. Ideal also for undercutting work.

N° 7037 STUBAI Multi-Tip scraper, with shaped tips

N° 7037 STUBAI Multi-Tip scraper, with shaped tips With 3 different shaped tips. Ideal tool for blending inside curves and squares. Developed to offer the full range of scraper shapes on one handle, with round, square and pear shaped cutters.

N° 7038 STUBAI Ringcutter with handle, head changeable

N° 7038 STUBAI Ringcutter with handle, head changeable This tool has a double bevel HSS ring and produces a super finish on end grain and internal curved surfaces.

N° 7039 STUBAI HSS Cuttinghead

N° 7039 STUBAI HSS Cuttinghead Fits to N° 7038 12/ 5938 12

N° 7040 STUBAI Captive ring tool, combination right/left

N° 7040 STUBAI Captive ring tool, combination right/left To be used right or left. Specially designed for producing rings that are captured by the workpiece and feature a double bevel which results in only one tool being necessary to complete a ring.

N° 7042 STUBAI HSS Ballcutter w. handle

N° 7042 STUBAI HSS Ballcutter w. handle

N° 7043 STUBAI HSS Cuttinghead

N° 7043 STUBAI HSS Cuttinghead Fits to N° 7042

N° 7050/55 STUBAI HSS Parting tool, tapered

N° 7050/55 STUBAI HSS Parting tool, tapered see picture 1: The sharp edges give clean cuts and the tapered profile reduces the risk of binding in the cut. see picture 2: The tapered profile reduces the risk of binding in the cut. The milled flute running along the bottom edge creates two sharp spurs at the cutting face.

N° 7056 STUBAI HSS Parting tool, square

N° 7056 STUBAI HSS Parting tool, square This tool is shaped to give clearance to the cut. The special profile reduces the risk of binding in the cut.

N° 7058 STUBAI HSS Parting tool, diamont section

N° 7058 STUBAI HSS Parting tool, diamont section This tool is shaped to give clearance to the cut. The special profile reduces the risk of binding in the cut.

N° 7060 STUBAI Long hole driller

N° 7060 STUBAI Long hole driller

N° 7081 STUBAI Micro-bowl gouge

N° 7081 STUBAI Micro-bowl gouge

N° 7082 STUBAI Micro-bowl gouge

N° 7082 STUBAI Micro-bowl gouge

N° 7083 STUBAI Micro-chisel, skew

N° 7083 STUBAI Micro-chisel, skew

N° 7084 STUBAI Micro-scraper, round nose

N° 7084 STUBAI Micro-scraper, round nose

N° 7085 STUBAI Micro-scraper, pointed

N° 7085 STUBAI Micro-scraper, pointed

N° 7087 STUBAI Micro-hollowing scraper, square, 80°

N° 7087 STUBAI Micro-hollowing scraper, square, 80°

N° 7090/ 7190 STUBAI HSS-Turning tool basic set 7 pcs

N° 7090/ 7190 STUBAI HSS-Turning tool basic set 7 pcs Consisting of 1 piece each: 7005 10, 7005 18, 7005 27, 7020 15, 7020 30, 7024 20, 7050 06 with 300 mm alder wood handles. Set with wooden case.

N° 7092/ 7192 STUBAI HSS-Turning tool set

N° 7092/ 7192 STUBAI HSS-Turning tool set Consisting of 1 piece each: 7005 13, 7005 22, 7020 25, 7055 06 with 240, alder wood handles. Set with wooden case.

N° 7094/7194 STUBAI HSS-Turning tool set

N° 7094/7194 STUBAI HSS-Turning tool set Consisting of 1 piece each: 7010 13, 7022 20, 7024 20, 7030 25 with 240 mm alder wood handles. Set with wooden case

N° 7099 STUBAI Alder-wood handles

N° 7099 STUBAI Alder-wood handles Made of fine-grained alder wood which absorbs perspiration, natural finish The ergonomically shaped handles have been tested for qears and guarantee a safe grip

N° 7105 STUBAI Roughing-out gouge

N° 7105 STUBAI Roughing-out gouge Designed for the initial turning on uneven or square spindle stock to round.

N° 7105 STUBAI Spindle gouge

N° 7105 STUBAI Spindle gouge Almost all curved shapes can te turned and made to a good smooth finish with this tool.

N° 7108 STUBAI Roughing-out gouge, heavy duty

N° 7108 STUBAI Roughing-out gouge, heavy duty This heavy duty gouge is designed for the initial turning on uneven or square spindle stock to round.

N° 7110 STUBAI Bowl gouge, deep fluted

N° 7110 STUBAI Bowl gouge, deep fluted The performance of the tool is particularly important when working against the grain. Our special HSS bowl gouge is far more suitable for this kind of work than conventional gouges. The special shape of this tool allows shavings to be removed quickly and efficiently and prevents the tool from being caught in the wood during turning.

N° 7120 STUBAI Chisel, skew

N° 7120 STUBAI Chisel, skew This skew chisel is indispensable for parting and for making V-cuts. Also for shaping along the grain.

N° 7122 STUBAI Scraper, round nose

N° 7122 STUBAI Scraper, round nose Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7124 STUBAI Scraper, square end

N° 7124 STUBAI Scraper, square end Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7126 STUBAI Scraper, pointed

N° 7126 STUBAI Scraper, pointed Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7130 STUBAI Scraper, round/side cut

N° 7130 STUBAI Scraper, round/side cut Ideal tool for blending inside curves and curved bottoms of vessels and boxes. Ideal also for undercutting work.

N° 7135 STUBAI Scraper, square/side cut

N° 7135 STUBAI Scraper, square/side cut Ideal tool for blending inside squares and square bottoms of boxes. Ideal also for undercutting work.

N° 7137 STUBAI Multi-Tip scraper

N° 7137 STUBAI Multi-Tip scraper With 3 different shaped tips. Ideal tool for blending inside curves and squares. Developed to offer the full range of scraper shapes on one handle, with round, square and pear shaped cutters.

N° 7138 STUBAI Ringcutter with handle

N° 7138 STUBAI Ringcutter with handle This tool has a double bevel HSS ring and produces a super finish on end grain and internal curved surfaces.

N° 7139 STUBAI HSS-Cuttinghead

N° 7139 STUBAI HSS-Cuttinghead Fits to N° 7038 12/ 5938 12

N° 7140 STUBAI Captive ring tool

N° 7140 STUBAI Captive ring tool To be used right or left. Specially designed for producing rings that are captured by the workpiece and feature a double bevel which results in only one tool being necessary to complete a ring.

N° 7150 STUBAI HSS-Parting tool

N° 7150 STUBAI HSS-Parting tool see picture 1: The sharp edges give clean cuts and the tapered profile reduces the risk of binding in the cut. see picture 2: The tapered profile reduces the risk of binding in the cut. The milled flute running along the bottom edge creates two sharp spurs at the cutting face.

N° 7158 STUBAI HSS-Parting tool

N° 7158 STUBAI HSS-Parting tool Diamond section. This tool is shaped to give clearance to the cut. The special profile reduces the risk of binding in the cut.

N° 7160 STUBAI Long hole driller

N° 7160 STUBAI Long hole driller

N° 7181 STUBAI Micro-bowl gouge

N° 7181 STUBAI Micro-bowl gouge

N° 7182 STUBAI Micro-bowl gouge

N° 7182 STUBAI Micro-bowl gouge

N° 7185 STUBAI Micro-scraper, pointed

N° 7185 STUBAI Micro-scraper, pointed

N° 7187 STUBAI Micro-hollowing scraper, square, 80°

N° 7187 STUBAI Micro-hollowing scraper, square, 80°

N° 7199 STUBAI Cherrywood handles

N° 7199 STUBAI Cherrywood handles Exclusive Line, exklusive design, made of Cherrywood

N° S7070 STUBAI Woodturning set 4 pcs.

N° S7070 STUBAI Woodturning set 4 pcs. 7008 19 Roughing-out gouge, heavy duty This heavy duty gouge is designed for the initial turning on uneven or square spindle stock to round. 7005 13 Spindle gouge Almost all curved shapes can te turned and made to a good smooth finish with this tool. 7058 05 Parting tool, diamond section This tool is shaped to give clearance to the cut. The special profile reduces the risk of binding in the cut. 7010 13 Bowl gouge, deep fluted The performance of the tool is particularly important when working against the grain. Our special HSS bowl gouge is far more suitable for this kind of work than conventional gouges. The special shape of this tool allows shavings to be removed quickly and efficiently and prevents the tool from being caught in the wood during turning.

N° S7070 STUBAI Woodturning set 5 pcs.

N° S7070 STUBAI Woodturning set 5 pcs. 7008 19 Roughing-out gouge, heavy duty This heavy duty gouge is designed for the initial turning on uneven or square spindle stock to round. 7005 13 Spindle gouge Almost all curved shapes can te turned and made to a good smooth finish with this tool. 7058 05 Parting tool, diamond section This tool is shaped to give clearance to the cut. The special profile reduces the risk of binding in the cut. 7010 13 Bowl gouge, deep fluted The performance of the tool is particularly important when working against the grain. Our special HSS bowl gouge is far more suitable for this kind of work than conventional gouges. The special shape of this tool allows shavings to be removed quickly and efficiently and prevents the tool from being caught in the wood during turning. 7020 25 Chisel, skew This skew chisel is indispensable for parting and for making V-cuts. Also for shaping along the grain.