preloader
Tools by
Professionals for Professionals

Woodworking Tools

  • All
  • Chisels
  • General (Wood)
  • Measuring Tools (Wood)
  • Wood Drills
  • WoodRepair

N° 1005 STUBAI Jointer’s hammer DIN 5109

N° 1005 STUBAI Jointer’s hammer DIN 5109 Lacquered, slightly flared handle of selected wood, head conform to DIN 5109.

N° 1018 STUBAI Tack and nail lifter

N° 1018 STUBAI Tack and nail lifter Made of CV-steel, lacquered handle and impact ferrule.

N° 1166 STUBAI Pin punches set

N° 1166 STUBAI Pin punches set CV steel, octagonal shaft, powder coated, polished, cassette N° 1167 61 in plastic bag

N° 1191 STUBAI Self grip pliers

N° 1191 STUBAI Self grip pliers Polished and nickel-plated, used for frame glueing. Jaw opening min. 23 mm max. 70 mm Jaw throat 45 mm Jaw capacity 20 mm Min. depth of hole for clamping 9 mm

N° 1781/1782 STUBAI Screwdriver-set PH / PZD

N° 1781/1782 STUBAI Screwdriver-set PH / PZD

N° 1805 21 STUBAI magnet holder for bits

N° 1805 21 STUBAI magnet holder for bits DIN 3126-C 6,3, ISO 1173

N° 1805 STUBAI Quick-lock magnet holder

N° 1805 STUBAI Quick-lock magnet holder For 1/4″ Hexagon Drive

N° 2500 STUBAI Dividers

N° 2500 STUBAI Dividers Tempering steel, tips hardened, polished, plastic packaging

N° 2510 STUBAI Bow dividers

N° 2510 STUBAI Bow dividers Design as N° 2500 but with bow and locking screw, plastic packaging

N° 2520 STUBAI Pencil dividers with bow

N° 2520 STUBAI Pencil dividers with bow Design as N° 2510 but with socket for pencil, pencil included, plastic packaging

N° 2521 STUBAI WoodRepair Basic-Set

N° 2521 STUBAI WoodRepair Basic-Set Contents: • 1x Basic pistol 180 / 80W • 1x branch filler mix Application: • Branch filler is applied with a hot glue gun • Press on the cooling iron, wait a few seconds • Remove excess branch filler with planer • Sand the spot • Finished! Advantages: + Easy to use with branch filler pistol + fast drying time + durable + compatible with oil, varnish, varnish and stain + dimensionally stable, does not sink + Non-toxic polyamide-based product + UV resistant + for indoor and outdoor use

N° 2521 STUBAI WoodRepair Branch Filler Pistol 300W

N° 2521 STUBAI WoodRepair Branch Filler Pistol 300W Application: • Branch filler is applied with a hot glue gun • Press on the cooling iron, wait a few seconds • Remove excess branch filler with planer • Sand the spot • Finished! Advantages: + Easy to use with branch filler pistol + fast drying time + durable + compatible with oil, varnish, varnish and stain + dimensionally stable, does not sink + Non-toxic polyamide-based product + UV resistant + for indoor and outdoor use

N° 2521 STUBAI WoodRepair Branch Filler Pistol 80W

N° 2521 STUBAI WoodRepair Branch Filler Pistol 80W Application: • Branch filler is applied with a hot glue gun • Press on the cooling iron, wait a few seconds • Remove excess branch filler with planer • Sand the spot • Finished! Advantages: + Easy to use with branch filler pistol + fast drying time + durable + compatible with oil, varnish, varnish and stain + dimensionally stable, does not sink + Non-toxic polyamide-based product + UV resistant + for indoor and outdoor use

N° 2521 STUBAI WoodRepair Color Changer

N° 2521 STUBAI WoodRepair Color Changer Application: • Branch filler is applied with a hot glue gun • Press on the cooling iron, wait a few seconds • Remove excess branch filler with planer • Sand the spot • Finished! Advantages: + Easy to use with branch filler pistol + fast drying time + durable + compatible with oil, varnish, varnish and stain + dimensionally stable, does not sink + Non-toxic polyamide-based product + UV resistant + for indoor and outdoor use

N° 2521 STUBAI WoodRepair Cooling Block

N° 2521 STUBAI WoodRepair Cooling Block Application: • Branch filler is applied with a hot glue gun • Press on the cooling iron, wait a few seconds • Remove excess branch filler with planer • Sand the spot • Finished! Advantages: + Easy to use with branch filler pistol + fast drying time + durable + compatible with oil, varnish, varnish and stain + dimensionally stable, does not sink + Non-toxic polyamide-based product + UV resistant + for indoor and outdoor use

N° 2521 STUBAI WoodRepair Cooling iron with handle

N° 2521 STUBAI WoodRepair Cooling iron with handle Application: • Branch filler is applied with a hot glue gun • Press on the cooling iron, wait a few seconds • Remove excess branch filler with planer • Sand the spot • Finished! Advantages: + Easy to use with branch filler pistol + fast drying time + durable + compatible with oil, varnish, varnish and stain + dimensionally stable, does not sink + Non-toxic polyamide-based product + UV resistant + for indoor and outdoor use

N° 2521 STUBAI WoodRepair Filler Bags

N° 2521 STUBAI WoodRepair Filler Bags Application: • Branch filler is applied with a hot glue gun • Press on the cooling iron, wait a few seconds • Remove excess branch filler with planer • Sand the spot • Finished! Advantages: + Easy to use with branch filler pistol + fast drying time + durable + compatible with oil, varnish, varnish and stain + dimensionally stable, does not sink + Non-toxic polyamide-based product + UV resistant + for indoor and outdoor use Branch Filler available in the colors: Ash, pine, branch, oak, beech, walnut, mahogany, bright pine, cherry, black, gray, yellow, white

N° 2521 STUBAI WoodRepair Hand Slicer

N° 2521 STUBAI WoodRepair Hand Slicer Application: • Branch filler is applied with a hot glue gun • Press on the cooling iron, wait a few seconds • Remove excess branch filler with planer • Sand the spot • Finished! Advantages: + Easy to use with branch filler pistol + fast drying time + durable + compatible with oil, varnish, varnish and stain + dimensionally stable, does not sink + Non-toxic polyamide-based product + UV resistant + for indoor and outdoor use

N° 2521 STUBAI WoodRepair Professional-Set

N° 2521 STUBAI WoodRepair Professional-Set Contents: • 1x professional pistol 360 / 300W • 1x branch filler mix • 1x aluminum cooling iron with handle • hand plane • color chart • sandpaper Application: • Branch filler is applied with a hot glue gun • Press on the cooling iron, wait a few seconds • Remove excess branch filler with planer • Sand the spot • Finished! Advantages: + Easy to use with branch filler pistol + fast drying time + durable + compatible with oil, varnish, varnish and stain + dimensionally stable, does not sink + Non-toxic polyamide-based product + UV resistant + for indoor and outdoor use

N° 2540 STUBAI Bow divider

N° 2540 STUBAI Bow divider Quenched and tempered steel, polished, with spring and adjustment screw

N° 2550 STUBAI Outside caliper

N° 2550 STUBAI Outside caliper made of steel, black galvanized, plastic packaging

N° 2560 STUBAI Inside caliper

N° 2560 STUBAI Inside caliper Made of steel, black galvanized, plastic packaging

N° 2590 STUBAI Angle reamer with notch

N° 2590 STUBAI Angle reamer with notch For wood, made of special tool steel. Cutter: 5 cutting notches, round, flared up to 14 mm Ø. Cutting length 117 mm. Handle: Flared up to 15 mm Ø. Length 115 mm

N° 2610 STUBAI Scriber

N° 2610 STUBAI Scriber straight, hexagonal handle, top chrom- vanadium-steel

N° 2620 STUBAI Scriber

N° 2620 STUBAI Scriber curved, knurled pencil, tops chrom-vanadium-steel

N° 2865 STUBAI 3D ratchet 1/4“ incl. TX-WI-T10

N° 2865 STUBAI 3D ratchet 1/4“ incl. TX-WI-T10

N° 2865 STUBAI Clamping device

N° 2865 STUBAI Clamping device N° 2865 01: Consisting of 2 Clamping device and 1 Connector piece N° 2865 03: Consisting of 4 Holders for Clamping device N° 2865 05: Holder set ( 4 pcs) with Woodenpiece f. Clamping device

N° 2871 STUBAI Malleable cast iron screw clamps, series L

N° 2871 STUBAI Malleable cast iron screw clamps, series L

N° 2872 STUBAI screw clamps with rail

N° 2872 STUBAI screw clamps with rail DIN 5117, heavy version

N° 2873 STUBAI All-steel screw clamps with profile rail

N° 2873 STUBAI All-steel screw clamps with profile rail

N° 2880 STUBAI Handle drilling jig in wooden box with accessories

N° 2880 STUBAI Handle drilling jig in wooden box with accessories

N° 3006 STUBAI Twist drill sets (dowel drills)

N° 3006 STUBAI Twist drill sets (dowel drills) Cylindrical shank, special steel, two cutting lips, with chip breaker Consisting of: Ø 4, 6, 8, 10 mm 4, 5, 6, 8, 10 mm

N° 3006 STUBAI Twist drills (dowel drills)

N° 3006 STUBAI Twist drills (dowel drills) CV-steel, cylindrical shank, brad point, relief-milled, Up to Ø 10 mm

N° 3008 STUBAI Twist drills (dowel drills)

N° 3008 STUBAI Twist drills (dowel drills) With stepped shank, brad point, relief-milled, special-steel, hardened,

N° 3045 STUBAI Rose head countersink bits

N° 3045 STUBAI Rose head countersink bits 90 ° Countersink for hand drilling machines with reduced shank, 7 cutting edges, tempered steel, hardened,

N° 3046 STUBAI Hand countersink

N° 3046 STUBAI Hand countersink With plastic handle and suspension hole

N° 3060 STUBAI Auger drills “Swiss pattern”

N° 3060 STUBAI Auger drills “Swiss pattern”

N° 3085 STUBAI Universal drills

N° 3085 STUBAI Universal drills With stepped shank (except Ø 8, 10 und 11 mm), brad point, two cutting lips, made of special tool steel, hardened, polished Use: For soft and hard wood, skew and edge drillings, also suitable for drilling machines.

N° 3086 STUBAI HM-universal drills

N° 3086 STUBAI HM-universal drills Drill with carbide cutting edges (center point, two pre-cutters, two cutting edges). Reduced shank, polished, sandblasted and burnished head. Use:Suitable for all woods, but especially for coated and laminated woods, plastics,chipboards. For smooth drill holes even for oblique drilling. Suitable also in hand-held drills.

N° 3099 STUBAI Shank extensions

N° 3099 STUBAI Shank extensions Of steel, burnished finish, suitable especially for universal drills 3085.

N° 3100 STUBAI tenon cutters

N° 3100 STUBAI tenon cutters Tool with reduced shank, multiple blades peripheral cutting edge, fromtempered steel, hardened. The tenons are made with a light excess so that the patch dowels sit properly. Use:For the production of patch dowels. Suitable with universal drill 3085 Speed table:Less than 16 mm: softwood 900 r.p.m. hardwood 450 r.p.m.16 to 35 mm: softwood 400 r.p.m. hardwood 250 r.p.m.About 35 mm: softwood 200 r.p.m. hardwood 250 r.p.m.The typical values are not guaranteed and depend on the type of wood, clamping etc.!

N° 3140 STUBAI Universal countersink

N° 3140 STUBAI Universal countersink 90 ° Countersink for universal use. Continuous, cylindrical shank, three cutting edges, HSS (high speed steel), hardened. Application: Universal use, for countersinking and deburring of holes in nearly all materials (wood, metal, aluminum, plastic).

N° 3230 STUBAI Plane blade

N° 3230 STUBAI Plane blade Conical, polished, PVC-packed.

N° 3250 STUBAI Laminated steel plane blade

N° 3250 STUBAI Laminated steel plane blade Conical, with short screw, polished, with cover, PVC-packed.

N° 3260 STUBAI Laminated steel plane blades

N° 3260 STUBAI Laminated steel plane blades Special steel, polished, short screw, for smoothing plane, PVC-packed.

N° 3270 STUBAI HSS-plane blade

N° 3270 STUBAI HSS-plane blade Used for plastics, for highest demands, PVC-packed.

N° 3310 STUBAI Front chop spindle

N° 3310 STUBAI Front chop spindle Made of steel, with wooden knob

N° 3320 STUBAI Joiner’s bench dogs

N° 3320 STUBAI Joiner’s bench dogs With spring, in pairs & burnished.

N° 3360 STUBAI Draw knives

N° 3360 STUBAI Draw knives Forged of high-quality steel, tempered and ground, edge with concave grinding. PVC edge guard.

N° 3420 STUBAI Joiner’s square

N° 3420 STUBAI Joiner’s square With mitre, stainless spring steel rail, nutwood stock, brass fittings, stock width 46 mm.

N° 3430 STUBAI Joiner’s square

N° 3430 STUBAI Joiner’s square With graduation, with mitre, bare steel blade, aluminium stock, brass fittings, stock width 46 mm.

N° 3430 STUBAI Joiner’s square Aluminium

N° 3430 STUBAI Joiner’s square Aluminium With double graduation, steel blade 40 x 1,2 mm, aluminium stock, anodized, 40 x 10 mm.

N° 3440 STUBAI Sliding bevel

N° 3440 STUBAI Sliding bevel Adjustable, bright, bare steel blade, nutwood stock, brass fittings on both sides, stock width 36 mm.

N° 3440 STUBAI Sliding bevel

N° 3440 STUBAI Sliding bevel Made of wood, waterproof glued, stock width 33 mm.

N° 3440 STUBAI Sliding bevel Aluminium

N° 3440 STUBAI Sliding bevel Aluminium Adjustable, stainless spring steel rail, aluminium stock, stock width 35 mm.

N° 3450 STUBAI Bevel

N° 3450 STUBAI Bevel With fixed nutwood stock, bare steel blade, brass fittings, stock width 40 mm.

N° 3450 STUBAI Bevel

N° 3450 STUBAI Bevel White beech wood lacquered, stock width 40 mm.

N° 3450 STUBAI Bevel Aluminium

N° 3450 STUBAI Bevel Aluminium Bare steel blade, 40 x 10 mm, alu stock anodized 40 x 1,2 mm

N° 3454 STUBAI Multifunction marking gouge

N° 3454 STUBAI Multifunction marking gouge Developed in close cooperation with Professionals. 3 functions in one device: marking gauge, circle and marking device. Anodized aluminum, with 2 tips made of carbid, 1 steel tip and pencil holder 1. Application as a marking gauge with a carbide tip. The marking is done by cutting 2. Marking with a pencil 3. Circles function with the upper scale. The starting point is the tip at the anchoring point for small circles 4. Circles function without scale. The starting point is the tip on the slider for larger circles 5. Enables easy transfer even with uneven walls

N° 3455 STUBAI Double marking gouge

N° 3455 STUBAI Double marking gouge Made of wood, lacquered, with graduation (100mm) and adjusting screw

N° 3456 STUBAI Mitre box

N° 3456 STUBAI Mitre box Made of beechwood, for 45° and 90° angles, glued and screwed. N°. 3456 01 – without saw. N° 3457 01 with saw. N° 3458 01 only saw.

N° 3460 STUBAI Square awls

N° 3460 STUBAI Square awls Round awl shatter proof, transparent plastic handle.

N° 3470 STUBAI Square awl

N° 3470 STUBAI Square awl Shatter proof, transparent plastic handle

N° 3480 STUBAI Brad awl

N° 3480 STUBAI Brad awl Shatter proof, transparent plastic handle

N° 3490 STUBAI Reaming awl

N° 3490 STUBAI Reaming awl With square blade, shatter proof, transparent plastic handle

N° 3510 STUBAI Wood chisels with red beech wood handle

N° 3510 STUBAI Wood chisels with red beech wood handle Extra long blade, drop forged, high alloy tool steel, special heat treatment, precision ground. Handle of knotless beech with strong ferrules, PVC edge guard. Sharpening instructions (applies to all wood chisel): The wedge angle should be wet sanded at an angle of 25 °. Under no circumstance exceed tempering temperature of 200° C / 410F (= light yellow), otherwise the hardness of blade would be decreased

N° 3511 STUBAI Wood chisels sets with red beech handle

N° 3511 STUBAI Wood chisels sets with red beech handle

N° 3530 STUBAI Special wood chisels Swedish type

N° 3530 STUBAI Special wood chisels Swedish type Form corresponds to ISO / DIN 3139 (European and international industrial standards). Blade forged from high alloy tool steel, special heat treatment, thereby fine grain texture in the microstructure, mirror polished surface lead to the finest cutting edge retention. The smooth finish reduces the effort of sharpening Handle: Selected white beechwood, strong corrosion resistant ferrules on front and percussive, shock absorbing bounce leather washer between handle and blade.

N° 3531 STUBAI Special wood chisels sets Swedish type

N° 3531 STUBAI Special wood chisels sets Swedish type

N° 3535 STUBAI Handle for N° 3530

N° 3535 STUBAI Handle for N° 3530 Made of white beechwood with corrosion protected ferrule.

N° 3540 STUBAI Chisels with red plastic handle

N° 3540 STUBAI Chisels with red plastic handle Extra long blade, drop-forged, high alloy steel. Special heat treatment. Finest grind. PVC edge guard. Handle: from shockproof CA (cellulose acetate), ergonomically designed with brushed, non-slip surface, with suspension hole and EAN code

N° 3541 STUBAI Chisels sets with red plastic handle

N° 3541 STUBAI Chisels sets with red plastic handle

N° 3543 STUBAI Chisels with black handle

N° 3543 STUBAI Chisels with black handle Extra long blade, drop forged, high alloy tool steel, special heat treatment, smooth finish, PVC edge guard.Handle: made of PP (Polypropylen), black, ergonomically designed with brushed, non-slip surface, with suspension hole and EAN code

N° 3544 STUBAI Chisels sets with black handle of polypropylene (PP)

N° 3544 STUBAI Chisels sets with black handle of polypropylene (PP)

N° 3545/3555 STUBAI Handle for N° 3540, 3543, 3550

N° 3545/3555 STUBAI Handle for N° 3540, 3543, 3550 Red handle: Made of impact resistant acetyl cellulose, ergonomically shaped with suspension hole Black handle: Ergonomically formed handle of ultra-shockproof polypropylen with suspension hole

N° 3550 STUBAI Special wood chisels, Swedish type, with red plastic handle of acetyl cellulose

N° 3550 STUBAI Special wood chisels, Swedish type, with red plastic handle of acetyl cellulose Form corresponds to ISO / DIN 3139 (European and international industrial standards). Blade forged from high alloy tool steel, special heat treatment, thereby fine grain texture in the microstructure, mirror polished surfaces lead to the finest cutting edge retention. The smooth finish reduces the effort of sharpening Handle: from shockproof CA (cellulose acetate), ergonomically designed with brushed, non-slip surface, with suspension hole and EAN code

N° 3551 STUBAI Special wood chisels sets, Swedish type with red plastic handle

N° 3551 STUBAI Special wood chisels sets, Swedish type with red plastic handle

N° 3560 STUBAI Professional wood chisels with 2K handle

N° 3560 STUBAI Professional wood chisels with 2K handle Handle: – Highly impact resistant – Ergonomic shape for fatigue free handling – Extra long handle for precise control – Asymmetrical profile with non-slip rubber inserts – Interchangeable coloured rubber rings for easy identification – Suspension hole in the handle for presentation and storage on tool racks – Rollstop – two flat faces prevent chisel from rolling off the bench – Well balanced chisel Blade: – High alloy tool steel – 2/3 of the blade hardened to 62 Rockwell – Mirror polished – Clearly marked with article number – Water-soluble, transparent lacquer for anticorrosion – PVC edge guard

N° 3561 STUBAI Professional wood chisels sets with 2K handle

N° 3561 STUBAI Professional wood chisels sets with 2K handle

N° 3565 STUBAI 2K-Handle

N° 3565 STUBAI 2K-Handle High impact shock cap Ergonomic shape for fatigue free handling Extra long handle for precise control Asymmetrically PVC component with anti slip inserts Interchangeable coloured rubber rings for easy identification Suspension hole in handle for presentation and storage on tool racks Rollstop – two flat faces prevent chisel from rolling off the bench Well balanced chisel for N° 3560 and 3561

N° 3565/3572 STUBAI Rubber ring for N° 3565 and 3572

N° 3565/3572 STUBAI Rubber ring for N° 3565 and 3572 N° 3565 02 rubber ring for N° 3565 01 N° 3572 02 rubber ring for N° 3572 01

N° 3570 STUBAI Special wood chisels Swedish type with ergonomic cork handle

N° 3570 STUBAI Special wood chisels Swedish type with ergonomic cork handle CORK Chisels The natural product CORK has the following advantages: – Comfortable grip – no adhesive feeling on hot days – No swelling in contact with liquids – Optimum power transmission 3571 04 = set 4 pcs. Blade width 13, 16, 20, 24 mm 3571 14 = set 4 pcs. Blade width 12, 16, 20, 24 mm 3571 06 = set 6 pcs. Blade width 6, 10, 13, 16, 20, 26 mm 3571 16 = set 6 pcs. Blade width 6, 10, 14, 18, 22, 26 mm Handle: – Highly impact resistant – Ergonomic shape for fatigue free handling – Extra long handle for precise control – Asymmetrical profile with slip free cork components – Interchangeable coloured rubber rings for easy identification – Suspension hole in the handle for presentation and storage on tool racks – Rollstop – two flat faces prevent chisel from rolling off the bench – Balanced weight ratio of the chisel Blade: – High-tensile alloy tool steel – 2/3 of the blade hardened to 62 Rockwell – Blade mirror polished – Clearly marked with article number – Water-soluble, transparent lacquer for anticorrosion – PVC edge guard

N° 3571 STUBAI Special wood chisels sets Swedish type with ergonomic cork handle

N° 3571 STUBAI Special wood chisels sets Swedish type with ergonomic cork handle

N° 3572 STUBAI CORK-handle for N° 3570 and 3571

N° 3572 STUBAI CORK-handle for N° 3570 and 3571 High impact shock cap Ergonomic shape for fatigue free handling Extra long handle for precise control Asymmetrically cork components with anti slip inserts Interchangeable coloured rubber rings for easy identification Suspension hole in handle for presentation and storage on tool racks Rollstop – two flat faces prevent chisel from rolling off the bench Well balanced chisel For N° 3570 and 3571

N° 3575 STUBAI Carpenter’s wood chisels

N° 3575 STUBAI Carpenter’s wood chisels Revolving ferrule Handle: Of selected white beech wood with strong striking ring Ergonomic, impact resistant handle of white beechwood High alloy tool steel Highest edge-holding ability 3/4 of the blade hardened to HRC 59-61 Extra strong and long blade, drop-forged. Special heat treatment. Finest grind. Cutting angle 25° Razor sharp edge Honed ready to use PVC edge guard

N° 3576 STUBAI Handle for N° 3575

N° 3576 STUBAI Handle for N° 3575 Made of white beechwood with strong revolving ferrule

N° 3600 STUBAI Firmer gouges

N° 3600 STUBAI Firmer gouges Stable ferrule Handle: Of selected red beechwood, knot free. Ergonomic, impact resistant handle of red beechwood Hand-forged blade, precision ground, polished. High alloy tool steel Highest edge-holding ability 2/3 of the blade hardened to HRC 59-61 Cutting angle 25° Razor sharp edge Honed ready to use

N° 3610 STUBAI Woodturning Chisel Set, 5-pcs

N° 3610 STUBAI Woodturning Chisel Set, 5-pcs Consisting of 1 piece each: 3622 12, 3628 13, 2632 06, 3634 12, 3638 15 with beech wood handles 240 mm with tool roll

N° 3620 STUBAI Chisel without handle, skew

N° 3620 STUBAI Chisel without handle, skew

N° 3622 STUBAI Chisel, skew

N° 3622 STUBAI Chisel, skew High quality carbon steel with excellent edge-holding ability, bevel-edged blade, suited for shaping and finishing

N° 3628 STUBAI Spindle gouge

N° 3628 STUBAI Spindle gouge High quality carbon steel with excellent edge-holding ability, concave shaped blade, for rough shaping

N° 3630 STUBAI Spindle gouge without handle

N° 3630 STUBAI Spindle gouge without handle

N° 3632 STUBAI Parting tools, tapered

N° 3632 STUBAI Parting tools, tapered High quality carbon steel with excellent edge-holding ability, for making deep cuts and for parting off. The tapered profile also reduces the risk of binding in the cut.

N° 3634 STUBAI Scraper, round nose

N° 3634 STUBAI Scraper, round nose High quality carbon steel with excellent edge-holding ability, single rimmed edge. These scrapers should be used with burr on edge.

N° 3636 STUBAI Scraper, pointed

N° 3636 STUBAI Scraper, pointed High quality carbon steel with excellent edge-holding ability, single rimmed edge. These scrapers should be used with burr on edge.

N° 3638 STUBAI Scraper, round/side cut

N° 3638 STUBAI Scraper, round/side cut High quality carbon steel with excellent edge-holding ability, designed for bleinding side walls and bottoms of vessels and undercutting the rims of bowls.

N° 3639 STUBAI Beech-wood handle

N° 3639 STUBAI Beech-wood handle Standard finish, varnished.

N° 3680 STUBAI Scraper blades

N° 3680 STUBAI Scraper blades Tempered and polished strapping steel

N° 3700 STUBAI Case Opener

N° 3700 STUBAI Case Opener S-shape, tool steel, with nail puller.

N° 3701 STUBAI Carpenter’s wrecking bars

N° 3701 STUBAI Carpenter’s wrecking bars Tool steel, lacquered.

N° 3780 STUBAI File handles

N° 3780 STUBAI File handles Made of beech wood

N° 3800 STUBAI Handles for art. 3510 and 3600

N° 3800 STUBAI Handles for art. 3510 and 3600 Made of red beechwood, lacquered, for N° 3510 and 3600

N° 3850 STUBAI Line level

N° 3850 STUBAI Line level

N° 3850 STUBAI PVC level

N° 3850 STUBAI PVC level Made of polystyrene foam, yellow. Accuracy 1 mm / m in normal position.

N° 3851 STUBAI Aluminium level, special, red

N° 3851 STUBAI Aluminium level, special, red Smooth aluminum profile. Accuracy 0.5 mm / m in normal position.

N° 3852 STUBAI Aluminium level silver anodized

N° 3852 STUBAI Aluminium level silver anodized Smooth, reinforced aluminum profile. Accuracy 0.5 mm / m in normal position. With fluorescent film

N° 3853 STUBAI Magnet level FL gold anodized

N° 3853 STUBAI Magnet level FL gold anodized Extra strong aluminum profile, anodized gold. Vial type B. With magnetic and fluorescent film

N° 3858 STUBAI Screed with vial type AL1

N° 3858 STUBAI Screed with vial type AL1 Rectangular aluminum profile, 100 x 18 mm, wall thickness 1.2 mm – with one horizontal vial, plastic flap.

N° 3858 STUBAI Screed with vial type AL2

N° 3858 STUBAI Screed with vial type AL2 Rectangular aluminum profile, 100 x 18 mm, wall thickness 1,2 mm – with one horizontal vial and a vertical Plexiglas vial, with plastic flaps

N° 3859 STUBAI Screed with 2 horizontally vials ALH2

N° 3859 STUBAI Screed with 2 horizontally vials ALH2 Rectangular aluminum profile, 100 x 18 mm, wall thickness 1.2 mm – with two horizontal vials and two handles, with plastic flaps

N° 3859 STUBAI Screed with handles and 2 vials ALH2

N° 3859 STUBAI Screed with handles and 2 vials ALH2 Rectangular aluminum profile, 100 x 18 mm, wall thickness 1.2 mm – with a horizontal and a vertical Plexiglas vial and two handles, with plastic flaps.

N° 3950/3960 STUBAI Carpenter’s square

N° 3950/3960 STUBAI Carpenter’s square High quality stainless steel, stock width 35 mm, without marking out holes.

N° 3970 STUBAI Carpenter’s square

N° 3970 STUBAI Carpenter’s square Polished, precision grinding, stock width 35 mm, without marking out holes.

N° 3980 STUBAI Carpenter’s square

N° 3980 STUBAI Carpenter’s square High quality spring steel, polished, tempered, precision grinding, stock width 40/50 mm, with marking out holes.

N° 3981 STUBAI Carpenter square

N° 3981 STUBAI Carpenter square With graduation and marking out holes, high quality spring steel, galvanized, polished, tempered, high angle accuracy, stock width 40/50 mm. Butt-welded, enables a smooth contact surface.

N° 3982 STUBAI Carpenter square

N° 3982 STUBAI Carpenter square Same design as N° 3981 but stock width 35 mm.

N° 3990 STUBAI Carpenter’s square

N° 3990 STUBAI Carpenter’s square High quality spring steel, polished, tempered, precision grinding, stock width 40/50 mm, without marking out holes.

N° 4416 Manual straddle panel lifter 2K

N° 4416 Manual straddle panel lifter 2K Applicable on the left and right side Capacity up to 30 kg.

N° 4416 STUBAI Board Carrier

N° 4416 STUBAI Board Carrier three arms with rubber sleeves up to 66 lbs. carrying capacity

N° 4416 STUBAI Panel carrier„Tragfix“

N° 4416 STUBAI Panel carrier„Tragfix“ The advantage over conventional plastic jaw carriers is a 20% higher load capacity due to its modular, flexible structure of the jaws. Panels are held securely by an ergonomic 2K – handle.  

N° 4416 STUBAI Panel lifter with pivot plate

N° 4416 STUBAI Panel lifter with pivot plate Made of galvanized steel with reinforcing groove and wooden handle. One single person is able to raise or bear heavy or bulky panels panels with a thickness of 35..Also inclines and steps can be overcomed easily due to the pivot plate.Max load up to 70,00 kgMax width of the plates: 35 mm

N° 4416 STUBAI Stone Carrier

N° 4416 STUBAI Stone Carrier 4416 01 Suitable for flagstones or tiles with 300 – 501 mm. Max. load capacity: 300N / 30kg! Version without t-handle. 4416 11 Suitable for flagstones or tiles with 500 – 801 mm. Max. load capacity: 300N / 30kg! Galvanized version. 4416 21 Suitable for flagstones or tiles with 800 – 1201 mm. Max. load capacity: 300N / 30kg! Galvanized version. Maximal thickness of carried element: 10 mm. Meant for 2 Persons operating only!

N° 4416 STUBAI Universal panel carrier

N° 4416 STUBAI Universal panel carrier Raises panels and other wooden items (eg chipboard), metal (eg steel,Stainless steel, coated metal sheets, aluminum, brass, copper), plastics and other materials such as gypsum boards, etc.

N° 4441 STUBAI Carpenters pencil

N° 4441 STUBAI Carpenters pencil Hardness: Medium

N° 4441 STUBAI Combi- carpenters pencil

N° 4441 STUBAI Combi- carpenters pencil 1/3 Copy- 2/3 Graphite

N° 4441 STUBAI Universal pencil

N° 4441 STUBAI Universal pencil

N° 5101 STUBAI Wood carving set 6 pcs.

N° 5101 STUBAI Wood carving set 6 pcs.

N° 5102 STUBAI Wood Carving Set 14 pcs.

N° 5102 STUBAI Wood Carving Set 14 pcs.

N° 5102 STUBAI Wood Carving Set 20 pcs.

N° 5102 STUBAI Wood Carving Set 20 pcs.

N° 5102 STUBAI Wood Carving Set 7 pcs.

N° 5102 STUBAI Wood Carving Set 7 pcs.

N° 5103 STUBAI Carver’s screw

N° 5103 STUBAI Carver’s screw with hexagon nut and washer

N° 5103 STUBAI Carver’s screw

N° 5103 STUBAI Carver’s screw Flat thread with washer, woodthread tip manufactured in order not to destroy or rip out of the workpiece while fastening

N° 5103 STUBAI Carving bench

N° 5103 STUBAI Carving bench complete, foldable with special carbin clamp, max. carrying capacity: 120 kgs

N° 5103 STUBAI Carving bench

N° 5103 STUBAI Carving bench with foldable legs, max. carrying capacity: 120 kgs

N° 5103 STUBAI Faceplate for carving clamp

N° 5103 STUBAI Faceplate for carving clamp

N° 5103 STUBAI Faceplate for carving clamp

N° 5103 STUBAI Faceplate for carving clamp

N° 5103 STUBAI Plate round, plain

N° 5103 STUBAI Plate round, plain 5103 13 = Ø 60 mm for carver‘s screw 5103 03; plain 5103 16 = Ø 80 mm for carver‘s screw 5103 03; grooved

N° 5103 STUBAI Rectangular carving clamp

N° 5103 STUBAI Rectangular carving clamp – with faceplate – faceplate 360° adjustable – height adjustable (20 cm) – quick fixing handle – 100 x 100

N° 5104 STUBAI Scarper blade

N° 5104 STUBAI Scarper blade

N° 5105 / 5106 STUBAI Chip Carving Knives Set

N° 5105 / 5106 STUBAI Chip Carving Knives Set

N° 5108 STUBAI Beechwood handle, octagonal

N° 5108 STUBAI Beechwood handle, octagonal

N° 5108 STUBAI Punches

N° 5108 STUBAI Punches High-quality tools for stamping various ornamental patterns and designs on wood and leather surfaces Art. N° 5108 80 Punches Set ArtikelnummerSerie 2KDesignGewicht gGröße mm 1 - Ø mmBezeichnung / designationEAN 9002793 5108 80300 g9 - tlg.843179 5108 8120 g100 x 6 mm858135 5108 8215 g100 x 5 mm858142 5108 8315 g100 x 5 mm858159 5108 8435 g100 x 8 mm858166 5108 8535 g100 x 8 mm858173 5108 8638 g100 x 8 mm858180 5108 8738 g100 x 8 mm858197 5108 8835 g100 x 8 mm858203 5108 8939 g100 x 8 mm858210

N° 5109 STUBAI Rifle Stock Set

N° 5109 STUBAI Rifle Stock Set

N° 5110 STUBAI Carving mallet for woodcarvers

N° 5110 STUBAI Carving mallet for woodcarvers beech, nature

N° 5200 STUBAI Woodcarvers adze

N° 5200 STUBAI Woodcarvers adze for rough woodcarver works

N° 526. STUBAI Fishtail Gouge heavy duty

N° 526. STUBAI Fishtail Gouge heavy duty Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep verst?rkte Ausführung, fürglatte Fl?chen, zum Vorstechen, Kerb- und Reliefschnitzarbeitenheavy duty, flat, rough work, chip carving and relief work 5261 50211 g50 mmA918266 5261 60247 g60 mmA918273 5261 70255 g70 mmA918280 5261 80261 g80 mmA918297 5263 50214 g50 mmB918341 5263 60224 g60 mmB918402 5263 70264 g70 mmB918464 5263 80282 g80 mmB918525 5264 50206 g50 mmC918358 5264 60237 g60 mmC918419 5264 70249 g70 mmC918471 5264 80293 g80 mmC918532 5265 50223 g50 mmD918365 5265 60236 g60 mmD918426 5265 70261 g70 mmD918488 5265 80302 g80 mmD918549 5266 50213 g50 mmE918372 5266 60236 g60 mmE918433 5266 70272 g70 mmE918495 5266 80286 g80 mmE918556 5267 50215 g50 mmF918389 5267 60244 g60 mmF918440 5267 70275 g70 mmF918501 5267 80285 g80 mmF918563 5268 50241 g50 mmG918396 5268 60280 g60 mmG918457 5268 70275 g70 mmG918518 5268 80280 g80 mmG918570

N° 53.. STUBAI Fishtail chisels

N° 53.. STUBAI Fishtail chisels

N° 5302 STUBAI SK Chisel

N° 5302 STUBAI SK Chisel

N° 5348 STUBAI ARKANSAS Sharpening Oil

N° 5348 STUBAI ARKANSAS Sharpening Oil Low-viscosity mineral oil

N° 5349 STUBAI ARKANSAS sharpening stone

N° 5349 STUBAI ARKANSAS sharpening stone Set: Art. N° 5349 01 Size variation of +/- 10% Use with original „Arkansas“ sharpening oil

N° 5349 STUBAI Original hard ARKANSAS sharpening stone

N° 5349 STUBAI Original hard ARKANSAS sharpening stone Size variation of +/- 10% Use with original „Arkansas“ sharpening oil

N° 5349 STUBAI Original hard BELGIAN crumb – sharpening stone

N° 5349 STUBAI Original hard BELGIAN crumb – sharpening stone Size variation of +/- 10% Use with distilled water

N° 5349 STUBAI Sharpening stone for woodturning tools

N° 5349 STUBAI Sharpening stone for woodturning tools Special sharpening stone for HSS-woodturning tools. Optimally used with sharpening oil or distilled water.

N° 5370/5380 STUBAI Spare sharpening wheel and sharpening paste

N° 5370/5380 STUBAI Spare sharpening wheel and sharpening paste Range of capacity: Each disk performs up to 4000 sharpening processes Felt buffing wheel, soft – black: For all hollow forms Felt buffing wheel, hard – white: For all straight and curved forms 1,00 kg of paste is enough for about 2000 sharpening processes

N° 5371 STUBAI Spare sharpening wheel

N° 5371 STUBAI Spare sharpening wheel applicable for automatic honing and polishing of carving tools

N° 5379 STUBAI V round shape

N° 5379 STUBAI V round shape

N° 5385 STUBAI Riffler rasps

N° 5385 STUBAI Riffler rasps all rasps have a length of 200 mm; To rough up the smooth woodsurface before the primer process

N° 54.. STUBAI Ice Carving Chisel

Nr. 54.. STUBAI Eisschnitzeisen

N° 5450 STUBAI Violin maker Set

N° 5450 STUBAI Violin maker Set

N° 5500 STUBAI Beechwood handle, octagonal

N° 5500 STUBAI Beechwood handle, octagonal

N° 556. STUBAI Fishtail Gouge heavy duty

N° 556. STUBAI Fishtail Gouge heavy duty

N° 5602 STUBAI Wood Carving Set, polished, 14 pcs.

N° 5602 STUBAI Wood Carving Set, polished, 14 pcs.

N° 5602 STUBAI Wood carving set, polished, 20 pcs.

N° 5602 STUBAI Wood carving set, polished, 20 pcs.

N° 5602 STUBAI Wood carving set, polished, 6 pcs.

N° 5602 STUBAI Wood carving set, polished, 6 pcs.

N° 5603 STUBAI Wood Carving Set, wooden case

N° 5603 STUBAI Wood Carving Set, wooden case

N° 58.. STUBAI Micro Carving tools

N° 58.. STUBAI Micro Carving tools

N° 5800 STUBAI Micro Carving tools Set 6 pcs.

N° 5800 STUBAI Micro Carving tools Set 6 pcs.

N° 5856 STUBAI Micro Wood carving set 6 pcs., handle 100 mm

N° 5856 STUBAI Micro Wood carving set 6 pcs., handle 100 mm

N° 5905 STUBAI HSS-spindle gouge, without handle

N° 5905 HSS-spindle gouge, without handle

N° 5905 STUBAI HSS-spindle gouge, without handle

N° 5905 STUBAI HSS-spindle gouge, without handle

N° 5908 STUBAI Roughing-out gouge, heavy duty

N° 5908 STUBAI Roughing-out gouge, heavy duty

N° 5910 STUBAI Bowl gouge without handle

N° 5910 STUBAI Bowl gouge without handle

N° 5920 STUBAI Chisel without handle, skew

N° 5920 STUBAI Chisel without handle, skew

N° 5922 Scraper without handle, round nose

N° 5922 Scraper without handle, round nose

N° 5924 STUBAI Scraper without handle, square end

N° 5924 STUBAI Scraper without handle, square end

N° 5926 STUBAI Scraper without handle, pointed

N° 5926 STUBAI Scraper without handle, pointed

N° 5928 STUBAI Oval-chisel without handle

N° 5928 STUBAI Oval-chisel without handle

N° 5930 STUBAI Scraper without handle, round/ side cut

N° 5930 STUBAI Scraper without handle, round/ side cut

N° 5935 STUBAI Scraper without handle, square/side cut

N° 5935 STUBAI Scraper without handle, square/side cut

N° 5940 STUBAI Captive ring tool without handle, comb.

N° 5940 STUBAI Captive ring tool without handle, comb.

N° 5945 STUBAI Ring tool without handle

N° 5945 STUBAI Ring tool without handle

N° 5950 STUBAI Parting tool without handle, tapered profile

N° 5950 STUBAI Parting tool without handle, tapered profile

N° 5955 STUBAI Parting tool without handle, tapered, milled groove

N° 5955 STUBAI Parting tool without handle, tapered, milled groove

N° 5956 STUBAI Parting tool without handle, square

N° 5956 STUBAI Parting tool without handle, square

N° 5958 STUBAI Parting tool without handle, diamond section

N° 5958 STUBAI Parting tool without handle, diamond section

N° 6720 STUBAI Hatchet

N° 6720 STUBAI Hatchet With nail puller, head ground and polished, single rimmed, with ash handle.

N° 6721 STUBAI Carpenter’s hatchet

N° 6721 STUBAI Carpenter’s hatchet With nail puller, convex edge grind, with handle, made ​​of tough, long-fibered hardwood. N° 6721 01 – 02 Single rimmed right N° 6721 11 – Single rimmed left N° 6721 14 = Replacement handle right N° 6721 15 = Replacement handle left

N° 7005 STUBAI Roughing-out gouge

N° 7005 STUBAI Roughing-out gouge Designed for the initial turning on uneven or square spindle stock to round.

N° 7005 STUBAI Spindle gouge

N° 7005 STUBAI Spindle gouge Almost all curved shapes can te turned and made to a good smooth finish with this tool.

N° 7008 STUBAI Roughing-out gouge, heavy duty

N° 7008 STUBAI Roughing-out gouge, heavy duty This heavy duty gouge is designed for the initial turning on uneven or square spindle stock to round.

N° 7010 STUBAI Bowl gouge, deep fluted

N° 7010 STUBAI Bowl gouge, deep fluted The performance of the tool is particularly important when working against the grain. Our special HSS bowl gouge is far more suitable for this kind of work than conventional gouges. The special shape of this tool allows shavings to be removed quickly and efficiently and prevents the tool from being caught in the wood during turning.

N° 7020 STUBAI Chisel, skew

N° 7020 STUBAI Chisel, skew This skew chisel is indispensable for parting and for making V-cuts. Also for shaping along the grain.

N° 7022 STUBAI Scraper, round nose

N° 7022 STUBAI Scraper, round nose Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7024 STUBAI Scraper, square end

N° 7024 STUBAI Scraper, square end Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7026 STUBAI Scraper, pointed

N° 7026 STUBAI Scraper, pointed Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7028 STUBAI Oval-chisel, skew

N° 7028 STUBAI Oval-chisel, skew Our oval skew chisels are a logical improvement of the skew chisels. We have been producing our HSS oval skew chisels for years. Due to their perfect shape they have in the meantime become an indispensable tool for woodturners. A HSS oval skew chisel has a number of advantages over the standard square chisel: – Because of its oval shape the tool is automatically in the correct cutting position and is therefore safer to use. – The oval form enables the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. – The oval form permits fine work on all round shapes. – Beginners particularly will find it easy to achieve clean cuts with this tool.

N° 7030 STUBAI Scraper, round/side cut

N° 7030 STUBAI Scraper, round/side cut Ideal tool for blending inside curves and curved bottoms of vessels and boxes. Ideal also for undercutting work.

N° 7035 STUBAI Scraper, square/ side cut

N° 7035 STUBAI Scraper, square/ side cut Ideal tool for blending inside squares and square bottoms of boxes. Ideal also for undercutting work.

N° 7037 STUBAI Multi-Tip scraper, with shaped tips

N° 7037 STUBAI Multi-Tip scraper, with shaped tips With 3 different shaped tips. Ideal tool for blending inside curves and squares. Developed to offer the full range of scraper shapes on one handle, with round, square and pear shaped cutters.

N° 7038 STUBAI Ringcutter with handle, head changeable

N° 7038 STUBAI Ringcutter with handle, head changeable This tool has a double bevel HSS ring and produces a super finish on end grain and internal curved surfaces.

N° 7039 STUBAI HSS Cuttinghead

N° 7039 STUBAI HSS Cuttinghead Fits to N° 7038 12/ 5938 12

N° 7040 STUBAI Captive ring tool, combination right/left

N° 7040 STUBAI Captive ring tool, combination right/left To be used right or left. Specially designed for producing rings that are captured by the workpiece and feature a double bevel which results in only one tool being necessary to complete a ring.

N° 7042 STUBAI HSS Ballcutter w. handle

N° 7042 STUBAI HSS Ballcutter w. handle

N° 7043 STUBAI HSS Cuttinghead

N° 7043 STUBAI HSS Cuttinghead Fits to N° 7042

N° 7050/55 STUBAI HSS Parting tool, tapered

N° 7050/55 STUBAI HSS Parting tool, tapered see picture 1: The sharp edges give clean cuts and the tapered profile reduces the risk of binding in the cut. see picture 2: The tapered profile reduces the risk of binding in the cut. The milled flute running along the bottom edge creates two sharp spurs at the cutting face.

N° 7056 STUBAI HSS Parting tool, square

N° 7056 STUBAI HSS Parting tool, square This tool is shaped to give clearance to the cut. The special profile reduces the risk of binding in the cut.

N° 7058 STUBAI HSS Parting tool, diamont section

N° 7058 STUBAI HSS Parting tool, diamont section This tool is shaped to give clearance to the cut. The special profile reduces the risk of binding in the cut.

N° 7060 STUBAI Long hole driller

N° 7060 STUBAI Long hole driller

N° 7081 STUBAI Micro-bowl gouge

N° 7081 STUBAI Micro-bowl gouge

N° 7082 STUBAI Micro-bowl gouge

N° 7082 STUBAI Micro-bowl gouge

N° 7083 STUBAI Micro-chisel, skew

N° 7083 STUBAI Micro-chisel, skew

N° 7084 STUBAI Micro-scraper, round nose

N° 7084 STUBAI Micro-scraper, round nose

N° 7085 STUBAI Micro-scraper, pointed

N° 7085 STUBAI Micro-scraper, pointed

N° 7087 STUBAI Micro-hollowing scraper, square, 80°

N° 7087 STUBAI Micro-hollowing scraper, square, 80°

N° 7090/ 7190 STUBAI HSS-Turning tool basic set 7 pcs

N° 7090/ 7190 STUBAI HSS-Turning tool basic set 7 pcs Consisting of 1 piece each: 7005 10, 7005 18, 7005 27, 7020 15, 7020 30, 7024 20, 7050 06 with 300 mm alder wood handles. Set with wooden case.

N° 7092/ 7192 STUBAI HSS-Turning tool set

N° 7092/ 7192 STUBAI HSS-Turning tool set Consisting of 1 piece each: 7005 13, 7005 22, 7020 25, 7055 06 with 240, alder wood handles. Set with wooden case.

N° 7094/7194 STUBAI HSS-Turning tool set

N° 7094/7194 STUBAI HSS-Turning tool set Consisting of 1 piece each: 7010 13, 7022 20, 7024 20, 7030 25 with 240 mm alder wood handles. Set with wooden case

N° 7099 STUBAI Alder-wood handles

N° 7099 STUBAI Alder-wood handles Made of fine-grained alder wood which absorbs perspiration, natural finish The ergonomically shaped handles have been tested for qears and guarantee a safe grip

N° 7105 STUBAI Roughing-out gouge

N° 7105 STUBAI Roughing-out gouge Designed for the initial turning on uneven or square spindle stock to round.

N° 7105 STUBAI Spindle gouge

N° 7105 STUBAI Spindle gouge Almost all curved shapes can te turned and made to a good smooth finish with this tool.

N° 7108 STUBAI Roughing-out gouge, heavy duty

N° 7108 STUBAI Roughing-out gouge, heavy duty This heavy duty gouge is designed for the initial turning on uneven or square spindle stock to round.

N° 7110 STUBAI Bowl gouge, deep fluted

N° 7110 STUBAI Bowl gouge, deep fluted The performance of the tool is particularly important when working against the grain. Our special HSS bowl gouge is far more suitable for this kind of work than conventional gouges. The special shape of this tool allows shavings to be removed quickly and efficiently and prevents the tool from being caught in the wood during turning.

N° 7120 STUBAI Chisel, skew

N° 7120 STUBAI Chisel, skew This skew chisel is indispensable for parting and for making V-cuts. Also for shaping along the grain.

N° 7122 STUBAI Scraper, round nose

N° 7122 STUBAI Scraper, round nose Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7124 STUBAI Scraper, square end

N° 7124 STUBAI Scraper, square end Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7126 STUBAI Scraper, pointed

N° 7126 STUBAI Scraper, pointed Used for working across the grain, e.g. bowls, plates etc. When the first stages of work have been completed with a spindle or bowl gouge these tools are used to give a smooth finish on all surfaces. These scrapers should be used with burr on edge.

N° 7130 STUBAI Scraper, round/side cut

N° 7130 STUBAI Scraper, round/side cut Ideal tool for blending inside curves and curved bottoms of vessels and boxes. Ideal also for undercutting work.

N° 7135 STUBAI Scraper, square/side cut

N° 7135 STUBAI Scraper, square/side cut Ideal tool for blending inside squares and square bottoms of boxes. Ideal also for undercutting work.

N° 7137 STUBAI Multi-Tip scraper

N° 7137 STUBAI Multi-Tip scraper With 3 different shaped tips. Ideal tool for blending inside curves and squares. Developed to offer the full range of scraper shapes on one handle, with round, square and pear shaped cutters.

N° 7138 STUBAI Ringcutter with handle

N° 7138 STUBAI Ringcutter with handle This tool has a double bevel HSS ring and produces a super finish on end grain and internal curved surfaces.

N° 7139 STUBAI HSS-Cuttinghead

N° 7139 STUBAI HSS-Cuttinghead Fits to N° 7038 12/ 5938 12

N° 7140 STUBAI Captive ring tool

N° 7140 STUBAI Captive ring tool To be used right or left. Specially designed for producing rings that are captured by the workpiece and feature a double bevel which results in only one tool being necessary to complete a ring.

N° 7150 STUBAI HSS-Parting tool

N° 7150 STUBAI HSS-Parting tool see picture 1: The sharp edges give clean cuts and the tapered profile reduces the risk of binding in the cut. see picture 2: The tapered profile reduces the risk of binding in the cut. The milled flute running along the bottom edge creates two sharp spurs at the cutting face.

N° 7158 STUBAI HSS-Parting tool

N° 7158 STUBAI HSS-Parting tool Diamond section. This tool is shaped to give clearance to the cut. The special profile reduces the risk of binding in the cut.

N° 7160 STUBAI Long hole driller

N° 7160 STUBAI Long hole driller

N° 7181 STUBAI Micro-bowl gouge

N° 7181 STUBAI Micro-bowl gouge

N° 7182 STUBAI Micro-bowl gouge

N° 7182 STUBAI Micro-bowl gouge

N° 7185 STUBAI Micro-scraper, pointed

N° 7185 STUBAI Micro-scraper, pointed

N° 7187 STUBAI Micro-hollowing scraper, square, 80°

N° 7187 STUBAI Micro-hollowing scraper, square, 80°

N° 7199 STUBAI Cherrywood handles

N° 7199 STUBAI Cherrywood handles Exclusive Line, exklusive design, made of Cherrywood

N° S2866/ S2867 STUBAI Screw clamp with Multi Swivel screw

N° S2866/ S2867 STUBAI Screw clamp with Multi Swivel screw S286616 Screw Clamp 600x120mm + Multi Swivel Screw 16mm + 3D Ratchet 1/4“ S286618 Screw Clamp 600x120mm + Multi Swivel Screw 18mm + 3D Ratchet 1/4“ S286716 Screw Clamp 600x120mm + Multi Swivel Screw 16mm without 3D Ratchet S286718 Screw Clamp 600x120mm +Multi Swivel Screw 18mm without 3D Ratchet

N° S2868 STUBAI 4pcs Swivel Screws + 3D Ratchet

N° S2868 STUBAI 4pcs Swivel Screws + 3D Ratchet S286816 Set: 4pcs Swivel Screws 16mm + 3D Ratchet S286818 Set: 4pcs Swivel Screws 18mm + 3D Ratchet

Special Sizes

Special Sizes

STUBAI Add on – articles for violin maker

Add on – articles for violin maker

SWEEP 1

SWEEP 1 - flat, rough work, chip carving and relief work Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades BalleisenStraight Chisel5201 010 g1 mm914046 Gerades BalleisenStraight Chisel5201 0225 g2 mm505770 Gerades BalleisenStraight Chisel5201 0330 g3 mm914053 Gerades BalleisenStraight Chisel5201 0430 g4 mm914060 Gerades BalleisenStraight Chisel5201 050 g5 mm914077 Gerades BalleisenStraight Chisel5201 0633 g6 mm914084 Gerades BalleisenStraight Chisel5201 070 g7 mm914091 Gerades BalleisenStraight Chisel5201 0836 g8 mm505787 Gerades BalleisenStraight Chisel5201 090 g9 mm914107 Gerades BalleisenStraight Chisel5201 1038 g10 mm914114 Gerades BalleisenStraight Chisel5201 1240 g12 mm914121 Gerades BalleisenStraight Chisel5201 1458 g14 mm914138 Gerades BalleisenStraight Chisel5201 1672 g16 mm505794 Gerades BalleisenStraight Chisel5201 1854 g18 mm914145 Gerades BalleisenStraight Chisel5201 2076 g20 mm914152 Gerades BalleisenStraight Chisel5201 2269 g22 mm914169 Gerades BalleisenStraight Chisel5201 2586 g25 mm914176 Gerades BalleisenStraight Chisel5201 30104 g30 mm505800 Gerades BalleisenStraight Chisel5201 35142 g35 mm914183 Gerades BalleisenStraight Chisel5201 400 g40 mm914190 Gerades BalleisenStraight Chisel5201 45240 g45 mm914206 Gerades BalleisenStraight Chisel5201 50250 g50 mm914213 Gerades BalleisenStraight Chisel5201 55280 g55 mm914220 Gerades BalleisenStraight Chisel5201 60318 g60 mm914237 Gerades Balleisen, schr?gSkew Chisel5202 0139 g1 mm914244 Gerades Balleisen, schr?gSkew Chisel5202 0239 g2 mm914251 Gerades Balleisen, schr?gSkew Chisel5202 0340 g3 mm914268 Gerades Balleisen, schr?gSkew Chisel5202 0430 g4 mm505817 Gerades Balleisen, schr?gSkew Chisel5202 0542 g5 mm914275 Gerades Balleisen, schr?gSkew Chisel5202 0650 g6 mm505824 Gerades Balleisen, schr?gSkew Chisel5202 0746g7 mm914282 Gerades Balleisen, schr?gSkew Chisel5202 0847 g8 mm914299 Gerades Balleisen, schr?gSkew Chisel5202 0949 g9 mm914305 Gerades Balleisen, schr?gSkew Chisel5202 1048 g10 mm505831 Gerades Balleisen, schr?gSkew Chisel5202 1255 g12 mm914312 Gerades Balleisen, schr?gSkew Chisel5202 1490 g14 mm505848 Gerades Balleisen, schr?gSkew Chisel5202 1672 g16 mm914329 Gerades Balleisen, schr?gSkew Chisel5202 1873 g18 mm914336 Gerades Balleisen, schr?gSkew Chisel5202 20110 g20 mm505855 Gerades Balleisen, schr?gSkew Chisel5202 2291 g22 mm914343 Gerades Balleisen, schr?gSkew Chisel5202 25160 g25 mm505862 Gerades Balleisen, schr?gSkew Chisel5202 30118 g30 mm914350 Gerades Balleisen, schr?gSkew Chisel5202 35154 g35 mm914367 Gerades Balleisen, schr?gSkew Chisel5202 40169 g40 mm505879 Gerades Balleisen, schr?gSkew Chisel5202 45180 g45 mm914374 Gerades Balleisen, schr?gSkew Chisel5202 50245 g50 mm914381 Gerades Balleisen, schr?gSkew Chisel5202 55274 g55 mm914398 Gerades Balleisen, schr?gSkew Chisel5202 60302 g60 mm914404 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 0239 g2 mm914411 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 0341 g3 mm914428 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 0443 g4 mm914435 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 0546 g5 mm914442 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 0647 g6 mm914459 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 0870 g8 mm506333 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 1049 g10 mm914466 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 1252 g12 mm914473 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 1462 g14 mm914480 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 1669 g16 mm914497 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 2071 g20 mm914503 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 25106 g25 mm914510 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 30112 g30 mm914527 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 40300 g40 mm844800 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 50315 g50 mm844794 Gekr?pftes Balleisen, langStraight spoon Chisel, long5221 60325 g60 mm844787 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 0242 g2 mm914534 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 0342 g3 mm914541 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 0444 g4 mm914558 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 0545 g5 mm914565 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 0647 g6 mm914572 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 0848 g8 mm914589 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 1049 g10 mm914596 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 1253 g12 mm914602 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 1461 g14 mm914619 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 1663 g16 mm914626 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 2086 g20 mm914633 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 25108 g25 mm914640 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 30112 g30 mm914657 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 40290 g40 mm844718 Gekr?pftes, linksschr?ges BalleisenSpoon Chisel, left5222 50310 g50 mm844701 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 0243 g2 mm914664 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 0343 g3 mm914671 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 0444 g4 mm914688 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 0545 g5 mm914695 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 0646 g6 mm914701 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 0848 g8 mm914718 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 1050 g10 mm914725 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 1253 g12 mm914732 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 1468 g14 mm914749 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 1669 g16 mm914756 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 2072 g20 mm914763 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 25103 g25 mm914770 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 30108 g30 mm914787 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 40250 g40 mm844411 Gekr?pftes, rechtsschr?ges BalleisenSpoon Chisel, right5223 45260 g45 mm844404 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 0120 g1 mm842035 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 0225 g2 mm842103 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 0430 g4 mm842165 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 0633 g6 mm842127 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 0836 g8 mm842134 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 1038 g10 mm842141 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 1240 g12 mm842158 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 1445 g14 mm842172 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 1652 g16 mm842189 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 1854 g18 mm842196 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 2068 g20 mm842202 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 2269 g22 mm842219 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5271 2586 g25 mm842226

SWEEP 1

SWEEP 1 - flat, rough work, chip carving and relief work Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mm 1 - Ø mmForm DesignEAN 9002793Stich Sweep Gerades BalleisenStraight Chisel5501 0260 g2 mm811338 Gerades BalleisenStraight Chisel5501 0464 g4 mm811345 Gerades BalleisenStraight Chisel5501 0666 g6 mm811352 Gerades BalleisenStraight Chisel5501 0868 g8 mm811369 Gerades BalleisenStraight Chisel5501 1072 g10 mm811376 Gerades BalleisenStraight Chisel5501 1274 g12 mm811383 Gerades BalleisenStraight Chisel5501 1479 g14 mm844237 Gerades BalleisenStraight Chisel5501 1690 g16 mm811390 Gerades BalleisenStraight Chisel5501 20103 g20 mm811406 Gerades BalleisenStraight Chisel5501 25140 g25 mm811413 Gerades BalleisenStraight Chisel5501 30164 g30 mm811420 Gerades BalleisenStraight Chisel5501 35180 g35 mm831862 Gerades BalleisenStraight Chisel5501 40200 g40 mm811437 Gerades BalleisenStraight Chisel5501 50300 g50 mm811444 Gerades BalleisenStraight Chisel5501 60370 g60 mm811451 Gerades Balleisen, schr?gSkew Chisel5502 0260 g2 mm811468 Gerades Balleisen, schr?gSkew Chisel5502 0464 g4 mm811475 Gerades Balleisen, schr?gSkew Chisel5502 0666 g6 mm811482 Gerades Balleisen, schr?gSkew Chisel5502 0873 g8 mm811499 Gerades Balleisen, schr?gSkew Chisel5502 1082 g10 mm811505 Gerades Balleisen, schr?gSkew Chisel5502 1285 g12 mm811512 Gerades Balleisen, schr?gSkew Chisel5502 1695 g16 mm811529 Gerades Balleisen, schr?gSkew Chisel5502 20103 g20 mm811536 Gerades Balleisen, schr?gSkew Chisel5502 25140 g25 mm811543 Gerades Balleisen, schr?gSkew Chisel5502 30165 g30 mm811550 Gerades Balleisen, schr?gSkew Chisel5502 35180 g35 mm843315 Gerades Balleisen, schr?gSkew Chisel5502 40200 g40 mm811567 Gerades Balleisen, schr?gSkew Chisel5502 50360 g50 mm811574 Gerades Balleisen, schr?gSkew Chisel5502 60370 g60 mm811581 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5521 0670 g6 mm812564 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5521 0870 g8 mm844299 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5521 1292 g12 mm812571 Stechbeitel, einseitig geschliffenWoodcarving Chisel, sharpened on one side5521 20100 g20 mm812588 Gekr?pftes BalleisenStraight spoon Chisel5599 0668 g6 mm834276 Gerades FlacheisenStraight flat Gouge5571 0260 g2 mm844947 Gerades FlacheisenStraight flat Gouge5571 0464 g4 mm844954 Gerades FlacheisenStraight flat Gouge5571 0666 g6 mm844961 Gerades FlacheisenStraight flat Gouge5571 0870 g8 mm844978 Gerades FlacheisenStraight flat Gouge5571 1072 g10 mm844985 Gerades FlacheisenStraight flat Gouge5571 1274 g12 mm844992 Gerades FlacheisenStraight flat Gouge5571 1479 g14 mm845005 Gerades FlacheisenStraight flat Gouge5571 1690 g16 mm845012 Gerades FlacheisenStraight flat Gouge5571 20103 g20 mm845029 Gerades FlacheisenStraight flat Gouge5571 25140 g25 mm845036 Gerades FlacheisenStraight flat Gouge5571 30164 g30 mm845043 Gerades FlacheisenStraight flat Gouge5571 35180 g35 mm845050 Gerades FlacheisenStraight flat Gouge5571 40200 g40 mm845067 Gerades FlacheisenStraight flat Gouge5571 50254 g50 mm845074 Gerades FlacheisenStraight flat Gouge5571 60344 g60 mm845081

SWEEP 10

SWEEP 10 - statues, definition work Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades HohleisenStraight Gouge5210 0244 g2 mm917030 Gerades HohleisenStraight Gouge5210 0344 g3 mm917047 Gerades HohleisenStraight Gouge5210 0444 g4 mm917054 Gerades HohleisenStraight Gouge5210 0554 g5 mm917061 Gerades HohleisenStraight Gouge5210 0654 g6 mm917078 Gerades HohleisenStraight Gouge5210 0858 g8 mm917085 Gerades HohleisenStraight Gouge5210 1061 g10 mm917092 Gerades HohleisenStraight Gouge5210 1268 g12 mm917108 Gerades HohleisenStraight Gouge5210 1481 g14 mm917115 Gerades HohleisenStraight Gouge5210 1689 g16 mm917122 Gerades HohleisenStraight Gouge5210 1889 g18 mm917139 Gerades HohleisenStraight Gouge5210 20110 g20 mm917146 Gerades HohleisenStraight Gouge5210 25156 g25 mm917153 Gerades HohleisenStraight Gouge5210 30168 g30 mm917160 Gerades HohleisenStraight Gouge5210 35256 g35 mm917177 Gerades HohleisenStraight Gouge5210 40278 g40 mm917184 Gerades HohleisenStraight Gouge5210 50358 g50 mm917191

SWEEP 10

SWEEP 10 - statues, definition work Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mm 1 - Ø mmForm DesignEAN 9002793Stich Sweep Gerades HohleisenStraight Gouge 5510 0370 g3 mm844275 5510 1085 g10 mm843254 5510 16105 g16 mm843261 5510 20120 g20 mm843278

SWEEP 11

SWEEP 11 - statues, definition work, mouldings and profiles Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades HohleisenStraight Gouge5211 0140 g1 mm506234 Gerades HohleisenStraight Gouge5211 0230 g2 mm506241 Gerades HohleisenStraight Gouge5211 0342 g3 mm917207 Gerades HohleisenStraight Gouge5211 0440 g4 mm506258 Gerades HohleisenStraight Gouge5211 0548 g5 mm917214 Gerades HohleisenStraight Gouge5211 0660 g6 mm506265 Gerades HohleisenStraight Gouge5211 0759 g7 mm917221 Gerades HohleisenStraight Gouge5211 0860 g8 mm506272 Gerades HohleisenStraight Gouge5211 1080 g10 mm506289 Gerades HohleisenStraight Gouge5211 1270 g12 mm917238 Gerades HohleisenStraight Gouge5211 1487 g14 mm917245 Gerades HohleisenStraight Gouge5211 16108 g16 mm506296 Gerades HohleisenStraight Gouge5211 18124 g18 mm917252 Gerades HohleisenStraight Gouge5211 20126 g20 mm917269 Gerades HohleisenStraight Gouge5211 25180 g25 mm917276 Gerades HohleisenStraight Gouge5211 30244 g30 mm917283 Gerades HohleisenStraight Gouge5211 35299 g35 mm917290 Gerades HohleisenStraight Gouge5211 40341 g40 mm917306 Gebogener HohleisenBent Gouge5220 0243 g2 mm917313 Gebogener HohleisenBent Gouge5220 0345 g3 mm917320 Gebogener HohleisenBent Gouge5220 0445 g4 mm917337 Gebogener HohleisenBent Gouge5220 0546 g5 mm917344 Gebogener HohleisenBent Gouge5220 0653 g6 mm917351 Gebogener HohleisenBent Gouge5220 0864 g8 mm917368 Gebogener HohleisenBent Gouge5220 1067 g10 mm917375 Gebogener HohleisenBent Gouge5220 1277 g12 mm917382 Gebogener HohleisenBent Gouge5220 1494 g14 mm917399 Gebogener HohleisenBent Gouge5220 1696 g16 mm917405 Gebogener HohleisenBent Gouge5220 20147 g20 mm917412 Gebogener HohleisenBent Gouge5220 25238 g25 mm917429 Gekr?pfter HohleisenSpoon Gouge5232 0244 g2 mm917436 Gekr?pfter HohleisenSpoon Gouge5232 0450 g4 mm917443 Gekr?pfter HohleisenSpoon Gouge5232 0652 g6 mm917450 Gekr?pfter HohleisenSpoon Gouge5232 0864 g8 mm917467 Gekr?pfter HohleisenSpoon Gouge5232 1066 g10 mm917474 Gekr?pfter HohleisenSpoon Gouge5232 1275 g12 mm917481 Gekr?pfter HohleisenSpoon Gouge5232 1693 g16 mm917498 Gekr?pfter HohleisenSpoon Gouge5232 20143 g20 mm917504 Gekr?pfter HohleisenSpoon Gouge5232 25224 g25 mm917511 Gekr?pfter HohleisenSpoon Gouge5232 30261 g30 mm917528

SWEEP 11

STICH 11 - statues, definition work, mouldings and profiles Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mm 1 - Ø mmForm DesignEAN 9002793Stich Sweep Gerades HohleisenStraight Gouge5511 0166 g1 mm812236 Gerades HohleisenStraight Gouge5511 0264 g2 mm812243 Gerades HohleisenStraight Gouge5511 0370 g3 mm812250 Gerades HohleisenStraight Gouge5511 0475 g4 mm812267 Gerades HohleisenStraight Gouge5511 0578 g5 mm843285 Gerades HohleisenStraight Gouge5511 0680 g6 mm812274 Gerades HohleisenStraight Gouge5511 0898 g8 mm812281 Gerades HohleisenStraight Gouge5511 10105 g10 mm812298 Gerades HohleisenStraight Gouge5511 12110 g12 mm812304 Gerades HohleisenStraight Gouge5511 14110 g14 mm844282 Gerades HohleisenStraight Gouge5511 16135 g16 mm812311 Gerades HohleisenStraight Gouge5511 20220 g20 mm812328 Gerades HohleisenStraight Gouge5511 25300 g25 mm812335 Gerades HohleisenStraight Gouge5511 30320 g30 mm812342 Gerades HohleisenStraight Gouge5511 35360 g35 mm846682 Gerades HohleisenStraight Gouge5511 40400 g40 mm812359 Gebogenes HohleisenBent Gouge5520 0270 g2 mm812496 Gebogenes HohleisenBent Gouge5520 0475 g4 mm812502 Gebogenes HohleisenBent Gouge5520 0678 g6 mm812519 Gebogenes HohleisenBent Gouge5520 0885 g8 mm812526 Gebogenes HohleisenBent Gouge5520 10100 g10 mm812533 Gebogenes HohleisenBent Gouge5520 14116 g14 mm812540 Gebogenes HohleisenBent Gouge5520 20140 g20 mm812557 Gekr?pftes HohleisenSpoon Gouge5532 0362 g3 mm812717 Gekr?pftes HohleisenSpoon Gouge5532 0680 g6 mm812724 Gekr?pftes HohleisenSpoon Gouge5532 1094 g10 mm812731 Gekr?pftes HohleisenSpoon Gouge5532 16125 g16 mm812748 Gekr?pftes HohleisenSpoon Gouge5532 20172 g20 mm812755 Gekr?pftes HohleisenSpoon Gouge5532 30180 g30 mm812762

SWEEP 2,5

SWEEP 2,5 - rough work, face and hand work, removal of waste, scraping work, rosettes/guilloches detail Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades FlacheisenStraight flat gouge5248 0230 g2 mm833521 Gerades FlacheisenStraight flat gouge5248 0330 g3 mm833705 Gerades FlacheisenStraight flat gouge5248 0450 g4 mm833538 Gerades FlacheisenStraight flat gouge5248 0555 g5 mm833712 Gerades FlacheisenStraight flat gouge5248 0655 g6 mm833545 Gerades FlacheisenStraight flat gouge5248 0860 g8 mm833552 Gerades FlacheisenStraight flat gouge5248 1080 g10 mm833569 Gerades FlacheisenStraight flat gouge5248 12110 g12 mm833576 Gerades FlacheisenStraight flat gouge5248 14120 g14 mm833583 Gerades FlacheisenStraight flat gouge5248 16140 g16 mm833590 Gerades FlacheisenStraight flat gouge5248 18150 g18 mm833606 Gerades FlacheisenStraight flat gouge5248 20160 g20 mm833613 Gerades FlacheisenStraight flat gouge5248 25180 g25 mm833620 Gerades FlacheisenStraight flat gouge5248 30185 g30 mm846729 Gerades FlacheisenStraight flat gouge5248 35190 g35 mm846736

SWEEP 3

SWEEP 3 - rough work, face and hand work, removal of waste, scraping work, rosettes/guilloches detail Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades FlacheisenStraight flat Gouge5203 0230 g2 mm914794 Gerades FlacheisenStraight flat Gouge5203 0342 g3 mm914800 Gerades FlacheisenStraight flat Gouge5203 0450 g4 mm914817 Gerades FlacheisenStraight flat Gouge5203 0540 g5 mm914824 Gerades FlacheisenStraight flat Gouge5203 0655 g6 mm505886 Gerades FlacheisenStraight flat Gouge5203 0860 g8 mm914831 Gerades FlacheisenStraight flat Gouge5203 1080 g10 mm505893 Gerades FlacheisenStraight flat Gouge5203 12110 g12 mm914848 Gerades FlacheisenStraight flat Gouge5203 14120 g14 mm505909 Gerades FlacheisenStraight flat Gouge5203 16140 g16 mm914855 Gerades FlacheisenStraight flat Gouge5203 18150 g18 mm914862 Gerades FlacheisenStraight flat Gouge5203 20160 g20 mm914879 Gerades FlacheisenStraight flat Gouge5203 25180 g25 mm505916 Gerades FlacheisenStraight flat Gouge5203 30158 g30 mm914886 Gerades FlacheisenStraight flat Gouge5203 35140 g35 mm914893 Gerades FlacheisenStraight flat Gouge5203 40166 g40 mm505923 Gerades FlacheisenStraight flat Gouge5203 45177 g45 mm914909 Gerades FlacheisenStraight flat Gouge5203 50254 g50 mm505930 Gerades FlacheisenStraight flat Gouge5203 60310 g60 mm914916  

SWEEP 3

STICH 3 - zum Vorstechen, für Gesicht und Hände, für Anschlagarbeiten, für Schrupparbeiten, für Rosetten Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mm 1 - Ø mmForm DesignEAN 9002793Stich Sweep Gerades FlacheisenStraight flat Gouge 5503 0260 g2 mm811598 5503 0462 g4 mm811604 5503 0668 g6 mm811611 5503 0874 g8 mm811628 5503 1080 g10 mm811635 5503 1282 g12 mm811642 5503 1685 g16 mm811659 5503 20102 g20 mm811666 5503 25142 g25 mm811673 5503 30146 g30 mm811680 5503 35180 g35 mm834269 5503 40190 g40 mm811697 5503 50300 g50 mm811703 5503 60370 g60 mm811710

SWEEP 39

SWEEP 39 - chip carving and relief work, gace and hand work, statues, mouldings and profiles Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerader GaißfußStraight V-Parting tool5239 0240 g2 mm917535 Gerader GaißfußStraight V-Parting tool5239 0442 g4 mm917542 Gerader GaißfußStraight V-Parting tool5239 0648 g6 mm917559 Gerader GaißfußStraight V-Parting tool5239 0862 g8 mm917566 Gerader GaißfußStraight V-Parting tool5239 1090 g10 mm506364 Gerader GaißfußStraight V-Parting tool5239 1266 g12 mm917573 Gerader GaißfußStraight V-Parting tool5239 1486 g14 mm917580 Gerader GaißfußStraight V-Parting tool5239 1688 g16 mm917597 Gerader GaißfußStraight V-Parting tool5239 18104 g18 mm917603 Gerader GaißfußStraight V-Parting tool5239 20146 g20 mm917610 Gerader GaißfußStraight V-Parting tool5239 25148 g25 mm917627 Gerader GaißfußStraight V-Parting tool5239 30227 g30 mm917634 Gebogener GaißfußBent V-Parting tool5240 0240 g2 mm917641 Gebogener GaißfußBent V-Parting tool5240 0442 g4 mm917658 Gebogener GaißfußBent V-Parting tool5240 0648 g6 mm917665 Gebogener GaißfußBent V-Parting tool5240 0855 g8 mm917672 Gebogener GaißfußBent V-Parting tool5240 1059 g10 mm917689 Gebogener GaißfußBent V-Parting tool5240 1264 g12 mm917696 Gebogener GaißfußBent V-Parting tool5240 1472 g14 mm917702 Gebogener GaißfußBent V-Parting tool5240 1679 g16 mm917719 Gebogener GaißfußBent V-Parting tool5240 1884 g18 mm917726 Gebogener GaißfußBent V-Parting tool5240 20132 g20 mm917733 Gebogener GaißfußBent V-Parting tool5240 25156 g25 mm917740 Gekr?pfter GaißfußSpoon V-Parting tool5243 0242 g2 mm917757 Gekr?pfter GaißfußSpoon V-Parting tool5243 0443 g4 mm917764 Gekr?pfter GaißfußSpoon V-Parting tool5243 0648 g6 mm917771 Gekr?pfter GaißfußSpoon V-Parting tool5243 0854 g8 mm917788 Gekr?pfter GaißfußSpoon V-Parting tool5243 1059 g10 mm917795 Gekr?pfter GaißfußSpoon V-Parting tool5243 1263 g12 mm917801 Gekr?pfter GaißfußSpoon V-Parting tool5243 1484 g14 mm917818 Gekr?pfter GaißfußSpoon V-Parting tool5243 1690 g16 mm917825

SWEEP 39

STICH 39 - Kerb- und Reliefschnitzarbeiten, für Gesicht und Hände, für Figurenarbeiten, für Profilleisten Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mm 1 - Ø mmForm DesignEAN 9002793Stich Sweep Gerader GaißfußStraight V-Parting tool5539 0264 g2 mm847115 Gerader GaißfußStraight V-Parting tool5539 0468 g4 mm843926 Gerader GaißfußStraight V-Parting tool5539 0685 g6 mm843933 Gerader GaißfußStraight V-Parting tool5539 0880 g8 mm837512 Gerader GaißfußStraight V-Parting tool5539 1085 g10 mm843940 Gerader GaißfußStraight V-Parting tool5539 1292 g12 mm843957

SWEEP 4

SWEEP 4 - rough work, face and hand work, removal of waste, scraping work, rosettes/guilloches detail Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades FlacheisenStraight flat Gouge5204 0240 g2 mm914923 Gerades FlacheisenStraight flat Gouge5204 0344 g3 mm914930 Gerades FlacheisenStraight flat Gouge5204 0430 g4 mm505947 Gerades FlacheisenStraight flat Gouge5204 0546 g5 mm914947 Gerades FlacheisenStraight flat Gouge5204 0648 g6 mm914954 Gerades FlacheisenStraight flat Gouge5204 0845 g8 mm505954 Gerades FlacheisenStraight flat Gouge5204 1060 g10 mm505961 Gerades FlacheisenStraight flat Gouge5204 1280 g12 mm505978 Gerades FlacheisenStraight flat Gouge5204 1466 g14 mm914961 Gerades FlacheisenStraight flat Gouge5204 1679 g16 mm505985 Gerades FlacheisenStraight flat Gouge5204 1869 g18 mm914978 Gerades FlacheisenStraight flat Gouge5204 20130 g20 mm505992 Gerades FlacheisenStraight flat Gouge5204 25103 g25 mm914985 Gerades FlacheisenStraight flat Gouge5204 30180 g30 mm506005 Gerades FlacheisenStraight flat Gouge5204 35136 g35 mm914992 Gerades FlacheisenStraight flat Gouge5204 40172 g40 mm915005 Gerades FlacheisenStraight flat Gouge5204 45184 g45 mm915012 Gerades FlacheisenStraight flat Gouge5204 50276 g50 mm915029 Gerades FlacheisenStraight flat Gouge5204 60312 g60 mm915036 Gebogenes FlacheisenLong bent flat Gouge5212 0240 g2 mm915043 Gebogenes FlacheisenLong bent flat Gouge5212 0343 g3 mm915050 Gebogenes FlacheisenLong bent flat Gouge5212 0442 g4 mm915067 Gebogenes FlacheisenLong bent flat Gouge5212 0544 g5 mm915074 Gebogenes FlacheisenLong bent flat Gouge5212 0642 g6 mm915081 Gebogenes FlacheisenLong bent flat Gouge5212 0846 g8 mm915098 Gebogenes FlacheisenLong bent flat Gouge5212 1048 g10 mm915104 Gebogenes FlacheisenLong bent flat Gouge5212 1252 g12 mm915111 Gebogenes FlacheisenLong bent flat Gouge5212 1466 g14 mm915128 Gebogenes FlacheisenLong bent flat Gouge5212 1670 g16 mm915135 Gebogenes FlacheisenLong bent flat Gouge5212 1871 g18 mm915142 Gebogenes FlacheisenLong bent flat Gouge5212 2077 g20 mm915159 Gebogenes FlacheisenLong bent flat Gouge5212 25101 g25 mm915166 Gebogenes FlacheisenLong bent flat Gouge5212 30110 g30 mm915173 Gebogenes FlacheisenLong bent flat Gouge5212 40290 g40 mm844695 Gebogenes FlacheisenLong bent flat Gouge5212 50310 g50 mm844688 Gebogenes FlacheisenLong bent flat Gouge5212 60325 g60 mm844671 Gekr?pftes FlacheisenSpoon flat Gouge5224 0243 g2 mm915180 Gekr?pftes FlacheisenSpoon flat Gouge5224 0343 g3 mm915197 Gekr?pftes FlacheisenSpoon flat Gouge5224 0443 g4 mm915203 Gekr?pftes FlacheisenSpoon flat Gouge5224 0544 g5 mm915210 Gekr?pftes FlacheisenSpoon flat Gouge5224 0645 g6 mm915227 Gekr?pftes FlacheisenSpoon flat Gouge5224 0846 g8 mm915234 Gekr?pftes FlacheisenSpoon flat Gouge5224 1049 g10 mm915241 Gekr?pftes FlacheisenSpoon flat Gouge5224 1252 g12 mm915258 Gekr?pftes FlacheisenSpoon flat Gouge5224 1465 g14 mm915265 Gekr?pftes FlacheisenSpoon flat Gouge5224 1667 g16 mm915272 Gekr?pftes FlacheisenSpoon flat Gouge5224 2084 g20 mm915289 Gekr?pftes FlacheisenSpoon flat Gouge5224 25109 g25 mm915296 Gekr?pftes FlacheisenSpoon flat Gouge5224 30115 g30 mm915302 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 0242 g2 mm915319 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 0442 g4 mm915326 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 0644 g6 mm915333 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 0845 g8 mm915340 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 1052 g10 mm915357 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 1254 g12 mm915364 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 1467 g14 mm915371 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 1671 g16 mm915388 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 2097 g20 mm915395 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 25110 g25 mm915401 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 30114 g30 mm915418 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 35110 g35 mm844473 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 40150 g40 mm844466 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 45190 g45 mm844459 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5234 50230 g50 mm844442

SWEEP 4

STICH 4 - zum Vorstechen, für Gesicht und Hände, für Anschlagarbeiten, für Schrupparbeiten, für Rosetten Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mm 1 - Ø mmForm DesignEAN 9002793Stich Sweep Gerades FlacheisenStraight flat Gouge5504 0260 g2 mm811727 Gerades FlacheisenStraight flat Gouge5504 0466 g4 mm811734 Gerades FlacheisenStraight flat Gouge5504 0668 g6 mm811741 Gerades FlacheisenStraight flat Gouge5504 0874 g8 mm811758 Gerades FlacheisenStraight flat Gouge5504 1074 g10 mm811765 Gerades FlacheisenStraight flat Gouge5504 1282 g12 mm811772 Gerades FlacheisenStraight flat Gouge5504 1685 g16 mm811789 Gerades FlacheisenStraight flat Gouge5504 20110 g20 mm811796 Gerades FlacheisenStraight flat Gouge5504 25150 g25 mm811802 Gerades FlacheisenStraight flat Gouge5504 30170 g30 mm811819 Gerades FlacheisenStraight flat Gouge5504 35180 g35 mm834252 Gerades FlacheisenStraight flat Gouge5504 40208 g40 mm811826 Gerades FlacheisenStraight flat Gouge5504 50300 g50 mm811833 Gerades FlacheisenStraight flat Gouge5504 60370 g60 mm811840 Gebogenes FlacheisenLong bent flat Gouge5512 0465 g4 mm812373 Gebogenes FlacheisenLong bent flat Gouge5512 0872 g8 mm812380 Gebogenes FlacheisenLong bent flat Gouge5512 1280 g12 mm812397 Gebogenes FlacheisenLong bent flat Gouge5512 1690 g16 mm812403 Gebogenes FlacheisenLong bent flat Gouge5512 20100 g20 mm812410 Gebogenes FlacheisenLong bent flat Gouge5512 30130 g30 mm812427 Gekr?pftes FlacheisenSpoon flat Gouge5524 0366 g3 mm812595 Gekr?pftes FlacheisenSpoon flat Gouge5524 0668 g6 mm812601 Gekr?pftes FlacheisenSpoon flat Gouge5524 1080 g10 mm812618 Gekr?pftes FlacheisenSpoon flat Gouge5524 1684 g16 mm812625 Gekr?pftes FlacheisenSpoon flat Gouge5524 2085 g20 mm812632 Gekr?pftes FlacheisenSpoon flat Gouge5524 30100 g30 mm812649 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5534 0670 g6 mm812786 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5534 1280 g12 mm812793 Verkehrt gekr?pftes FlacheisenBack bent spoon flat Gouge5534 20100 g20 mm812809 Gerades HohleisenStraight Gouge5554 0670 g6 mm812991 Gerades HohleisenStraight Gouge5554 1278 g12 mm813004 Gerades HohleisenStraight Gouge5554 2090 g20 mm813011

SWEEP 41

SWEEP 41 - chip carving and relief work, gace and hand work, statues, mouldings and profiles Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerader GaißfußStraight V-Parting tool5241 0239 g2 mm917832 Gerader GaißfußStraight V-Parting tool5241 0446 g4 mm917849 Gerader GaißfußStraight V-Parting tool5241 0670 g6 mm506371 Gerader GaißfußStraight V-Parting tool5241 0863 g8 mm917856 Gerader GaißfußStraight V-Parting tool5241 1077 g10 mm917863 Gerader GaißfußStraight V-Parting tool5241 1282 g12 mm917870 Gerader GaißfußStraight V-Parting tool5241 1488 g14 mm917887 Gerader GaißfußStraight V-Parting tool5241 1694 g16 mm917894 Gerader GaißfußStraight V-Parting tool5241 20140 g20 mm917900 Gebogener GaißfußBent V-Parting tool5242 0240 g2 mm917917 Gebogener GaißfußBent V-Parting tool5242 0445 g4 mm917924 Gebogener GaißfußBent V-Parting tool5242 0649 g6 mm917931 Gebogener GaißfußBent V-Parting tool5242 0861 g8 mm917948 Gebogener GaißfußBent V-Parting tool5242 1069 g10 mm917955 Gebogener GaißfußBent V-Parting tool5242 1271 g12 mm917962 Gebogener GaißfußBent V-Parting tool5242 1483 g14 mm917979 Gebogener GaißfußBent V-Parting tool5242 1692 g16 mm917986 Gekr?pfter GaißfußSpoon V-Parting tool5244 0240 g2 mm917993 Gekr?pfter GaißfußSpoon V-Parting tool5244 0446 g4 mm918006 Gekr?pfter GaißfußSpoon V-Parting tool5244 0648 g6 mm918013 Gekr?pfter GaißfußSpoon V-Parting tool5244 0859 g8 mm918020 Gekr?pfter GaißfußSpoon V-Parting tool5244 1062 g10 mm918044 Gekr?pfter GaißfußSpoon V-Parting tool5244 1267 g12 mm918051

SWEEP 41

STICH 41 – Kerb- und Reliefschnitzarbeiten, für Gesicht und Hände, für Figurenarbeiten, für Profilleisten

SWEEP 45

SWEEP 45 - rough work, face and hand work, removal of waste, scraping work, rosettes/guilloches detail Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerader GaißfußStraight V-Parting tool5245 0240 g2 mm918068 Gerader GaißfußStraight V-Parting tool5245 0442 g4 mm918075 Gerader GaißfußStraight V-Parting tool5245 0645 g6 mm918082 Gerader GaißfußStraight V-Parting tool5245 0850 g8 mm918099 Gerader GaißfußStraight V-Parting tool5245 1052 g10 mm918105 Gerader GaißfußStraight V-Parting tool5245 1259 g12 mm918112 Gerader GaißfußStraight V-Parting tool5245 1470 g14 mm918129 Gerader GaißfußStraight V-Parting tool5245 1674 g16 mm918136 Gerader GaißfußStraight V-Parting tool5245 20108 g20 mm918143 Gerader GaißfußStraight V-Parting tool5245 25146 g25 mm918150 Gerader GaißfußStraight V-Parting tool5245 30171 g30 mm918167 Gebogener GaißfußBent V-Parting tool5246 0241 g2 mm918174 Gebogener GaißfußBent V-Parting tool5246 0442 g4 mm918181 Gebogener GaißfußBent V-Parting tool5246 0644 g6 mm918198 Gebogener GaißfußBent V-Parting tool5246 0846 g8 mm918204 Gebogener GaißfußBent V-Parting tool5246 1050 g10 mm918211 Gebogener GaißfußBent V-Parting tool5246 1258 g12 mm918228 Gebogener GaißfußBent V-Parting tool5246 1461 g14 mm918235 Gebogener GaißfußBent V-Parting tool5246 1681 g16 mm918242 Gebogener GaißfußBent V-Parting tool5246 20101 g20 mm918259

SWEEP 45

STICH 45 – zum Vorstechen, für Gesicht und Hände, für Anschlagarbeiten, für Schrupparbeiten, für Rosetten

SWEEP 47

SWEEP 47 - chip carving and relief work, gace and hand work, statues, mouldings and profiles Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep GaißfußV-Parting tool 5247 0545 g5 mm818535 5247 0760 g7 mm818528 5247 1090 g10 mm818504

SWEEP 47

STICH 47 – Kerb- und Reliefschnitzarbeiten, für Gesicht und Hände, für Figurenarbeiten, für Profilleisten

SWEEP 5

SWEEP 5 - rough work, face and hand work, removal of waste, scraping work, rosettes/guilloches detail Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades HohleisenStraight Gouge5205 0241 g2 mm506012 Gerades HohleisenStraight Gouge5205 0342 g3 mm915425 Gerades HohleisenStraight Gouge5205 0443 g4 mm915432 Gerades HohleisenStraight Gouge5205 0543 g5 mm915449 Gerades HohleisenStraight Gouge5205 0645 g6 mm506029 Gerades HohleisenStraight Gouge5205 0845 g8 mm915456 Gerades HohleisenStraight Gouge5205 1047 g10 mm506036 Gerades HohleisenStraight Gouge5205 1252 g12 mm915463 Gerades HohleisenStraight Gouge5205 1464 g14 mm506043 Gerades HohleisenStraight Gouge5205 1663 g16 mm915470 Gerades HohleisenStraight Gouge5205 1870 g18 mm506050 Gerades HohleisenStraight Gouge5205 2085 g20 mm915487 Gerades HohleisenStraight Gouge5205 25106 g25 mm506067 Gerades HohleisenStraight Gouge5205 30114 g30 mm915494 Gerades HohleisenStraight Gouge5205 35162 g35 mm915500 Gerades HohleisenStraight Gouge5205 40178 g40 mm506074 Gerades HohleisenStraight Gouge5205 45188 g45 mm915517 Gerades HohleisenStraight Gouge5205 50271 g50 mm915524 Gerades HohleisenStraight Gouge5205 60323 g60 mm915531 Gebogenes HohleisenBent Gouge5214 0242 g2 mm915548 Gebogenes HohleisenBent Gouge5214 0343 g3 mm915555 Gebogenes HohleisenBent Gouge5214 0444 g4 mm915562 Gebogenes HohleisenBent Gouge5214 0544 g5 mm915579 Gebogenes HohleisenBent Gouge5214 0645 g6 mm915586 Gebogenes HohleisenBent Gouge5214 0846 g8 mm915593 Gebogenes HohleisenBent Gouge5214 1051 g10 mm915609 Gebogenes HohleisenBent Gouge5214 1255 g12 mm915616 Gebogenes HohleisenBent Gouge5214 1490 g14 mm915623 Gebogenes HohleisenBent Gouge5214 1667 g16 mm915630 Gebogenes HohleisenBent Gouge5214 1869 g18 mm915647 Gebogenes HohleisenBent Gouge5214 2077 g20 mm506302 Gebogenes HohleisenBent Gouge5214 25104 g25 mm915654 Gebogenes HohleisenBent Gouge5214 30110 g30 mm915661 Gebogenes HohleisenBent Gouge5214 40290 g40 mm844664 Gebogenes HohleisenBent Gouge5214 60320 g60 mm844657 Gekr?pftes HohleisenSpoon Gouge5226 0241 g2 mm915678 Gekr?pftes HohleisenSpoon Gouge5226 0342 g3 mm915685 Gekr?pftes HohleisenSpoon Gouge5226 0444 g4 mm915692 Gekr?pftes HohleisenSpoon Gouge5226 0545 g5 mm915708 Gekr?pftes HohleisenSpoon Gouge5226 0645 g6 mm915715 Gekr?pftes HohleisenSpoon Gouge5226 0846 g8 mm915722 Gekr?pftes HohleisenSpoon Gouge5226 1050 g10 mm915739 Gekr?pftes HohleisenSpoon Gouge5226 1251 g12 mm915746 Gekr?pftes HohleisenSpoon Gouge5226 1463 g14 mm915753 Gekr?pftes HohleisenSpoon Gouge5226 1665 g16 mm915760 Gekr?pftes HohleisenSpoon Gouge5226 2079 g20 mm915777 Gekr?pftes HohleisenSpoon Gouge5226 25103 g25 mm915784 Gekr?pftes HohleisenSpoon Gouge5226 30115 g30 mm915791 Gekr?pftes HohleisenSpoon Gouge5226 40290 g40 mm844763 Gekr?pftes HohleisenSpoon Gouge5226 45300 g45 mm844756

SWEEP 5

STICH 5 – zum Vorstechen, für Gesicht und Hände, für Anschlagarbeiten, für Schrupparbeiten, für Rosetten

SWEEP 6

SWEEP 6 - statues Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades HohleisenStraight Gouge5205 0241 g2 mm506012 Gerades HohleisenStraight Gouge5205 0342 g3 mm915425 Gerades HohleisenStraight Gouge5205 0443 g4 mm915432 Gerades HohleisenStraight Gouge5205 0543 g5 mm915449 Gerades HohleisenStraight Gouge5205 0645 g6 mm506029 Gerades HohleisenStraight Gouge5205 0845 g8 mm915456 Gerades HohleisenStraight Gouge5205 1047 g10 mm506036 Gerades HohleisenStraight Gouge5205 1252 g12 mm915463 Gerades HohleisenStraight Gouge5205 1464 g14 mm506043 Gerades HohleisenStraight Gouge5205 1663 g16 mm915470 Gerades HohleisenStraight Gouge5205 1870 g18 mm506050 Gerades HohleisenStraight Gouge5205 2085 g20 mm915487 Gerades HohleisenStraight Gouge5205 25106 g25 mm506067 Gerades HohleisenStraight Gouge5205 30114 g30 mm915494 Gerades HohleisenStraight Gouge5205 35162 g35 mm915500 Gerades HohleisenStraight Gouge5205 40178 g40 mm506074 Gerades HohleisenStraight Gouge5205 45188 g45 mm915517 Gerades HohleisenStraight Gouge5205 50271 g50 mm915524 Gerades HohleisenStraight Gouge5205 60323 g60 mm915531 Gebogenes HohleisenBent Gouge5214 0242 g2 mm915548 Gebogenes HohleisenBent Gouge5214 0343 g3 mm915555 Gebogenes HohleisenBent Gouge5214 0444 g4 mm915562 Gebogenes HohleisenBent Gouge5214 0544 g5 mm915579 Gebogenes HohleisenBent Gouge5214 0645 g6 mm915586 Gebogenes HohleisenBent Gouge5214 0846 g8 mm915593 Gebogenes HohleisenBent Gouge5214 1051 g10 mm915609 Gebogenes HohleisenBent Gouge5214 1255 g12 mm915616 Gebogenes HohleisenBent Gouge5214 1490 g14 mm915623 Gebogenes HohleisenBent Gouge5214 1667 g16 mm915630 Gebogenes HohleisenBent Gouge5214 1869 g18 mm915647 Gebogenes HohleisenBent Gouge5214 2077 g20 mm506302 Gebogenes HohleisenBent Gouge5214 25104 g25 mm915654 Gebogenes HohleisenBent Gouge5214 30110 g30 mm915661 Gebogenes HohleisenBent Gouge5214 40290 g40 mm844664 Gebogenes HohleisenBent Gouge5214 60320 g60 mm844657 Gekr?pftes HohleisenSpoon Gouge5226 0241 g2 mm915678 Gekr?pftes HohleisenSpoon Gouge5226 0342 g3 mm915685 Gekr?pftes HohleisenSpoon Gouge5226 0444 g4 mm915692 Gekr?pftes HohleisenSpoon Gouge5226 0545 g5 mm915708 Gekr?pftes HohleisenSpoon Gouge5226 0645 g6 mm915715 Gekr?pftes HohleisenSpoon Gouge5226 0846 g8 mm915722 Gekr?pftes HohleisenSpoon Gouge5226 1050 g10 mm915739 Gekr?pftes HohleisenSpoon Gouge5226 1251 g12 mm915746 Gekr?pftes HohleisenSpoon Gouge5226 1463 g14 mm915753 Gekr?pftes HohleisenSpoon Gouge5226 1665 g16 mm915760 Gekr?pftes HohleisenSpoon Gouge5226 2079 g20 mm915777 Gekr?pftes HohleisenSpoon Gouge5226 25103 g25 mm915784 Gekr?pftes HohleisenSpoon Gouge5226 30115 g30 mm915791 Gekr?pftes HohleisenSpoon Gouge5226 40290 g40 mm844763 Gekr?pftes HohleisenSpoon Gouge5226 45300 g45 mm844756

SWEEP 6

STICH 6 – für Figurenarbeiten

SWEEP 7

SWEEP 7 - Chip carving and relief work, statues Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades HohleisenStraight Gouge5207 0230 g2 mm506081 Gerades HohleisenStraight Gouge5207 0342 g3 mm916101 Gerades HohleisenStraight Gouge5207 0440 g4 mm506098 Gerades HohleisenStraight Gouge5207 0543 g5 mm916118 Gerades HohleisenStraight Gouge5207 0645 g6 mm916125 Gerades HohleisenStraight Gouge5207 0860 g8 mm506104 Gerades HohleisenStraight Gouge5207 1070 g10 mm506111 Gerades HohleisenStraight Gouge5207 1259 g12 mm916132 Gerades HohleisenStraight Gouge5207 1467 g14 mm916149 Gerades HohleisenStraight Gouge5207 16120 g16 mm506128 Gerades HohleisenStraight Gouge5207 18120 g18 mm837574 Gerades HohleisenStraight Gouge5207 2080 g20 mm506135 Gerades HohleisenStraight Gouge5207 25109 g25 mm506142 Gerades HohleisenStraight Gouge5207 30116 g30 mm916156 Gerades HohleisenStraight Gouge5207 35178 g35 mm506159 Gerades HohleisenStraight Gouge5207 40180 g40 mm916163 Gerades HohleisenStraight Gouge5207 50272 g50 mm916170 Gebogenes HohleisenBent Gouge5216 0241 g2 mm916187 Gebogenes HohleisenBent Gouge5216 0343 g3 mm916194 Gebogenes HohleisenBent Gouge5216 0443 g4 mm916200 Gebogenes HohleisenBent Gouge5216 0544 g5 mm916217 Gebogenes HohleisenBent Gouge5216 0647 g6 mm916224 Gebogenes HohleisenBent Gouge5216 0848 g8 mm916231 Gebogenes HohleisenBent Gouge5216 1051 g10 mm916248 Gebogenes HohleisenBent Gouge5216 12100 g12 mm506319 Gebogenes HohleisenBent Gouge5216 1468 g14 mm916255 Gebogenes HohleisenBent Gouge5216 1672 g16 mm916262 Gebogenes HohleisenBent Gouge5216 1875 g18 mm916279 Gebogenes HohleisenBent Gouge5216 2087 g20 mm916286 Gebogenes HohleisenBent Gouge5216 25109 g25 mm916293 Gebogenes HohleisenBent Gouge5216 30121 g30 mm916309 Gebogenes HohleisenBent Gouge5216 50310 g50 mm844640 Gekr?pftes HohleisenSpoon Gouge5228 0242 g2 mm916316 Gekr?pftes HohleisenSpoon Gouge5228 0342 g3 mm916323 Gekr?pftes HohleisenSpoon Gouge5228 0444 g4 mm916330 Gekr?pftes HohleisenSpoon Gouge5228 0545 g5 mm916347 Gekr?pftes HohleisenSpoon Gouge5228 0646 g6 mm916354 Gekr?pftes HohleisenSpoon Gouge5228 0845 g8 mm916361 Gekr?pftes HohleisenSpoon Gouge5228 1053 g10 mm916378 Gekr?pftes HohleisenSpoon Gouge5228 1255 g12 mm916385 Gekr?pftes HohleisenSpoon Gouge5228 1467 g14 mm916392 Gekr?pftes HohleisenSpoon Gouge5228 1669 g16 mm506340 Gekr?pftes HohleisenSpoon Gouge5228 2080 g20 mm916408 Gekr?pftes HohleisenSpoon Gouge5228 25106 g25 mm916415 Gekr?pftes HohleisenSpoon Gouge5228 30114 g30 mm916422 Gekr?pftes HohleisenSpoon Gouge5228 40305 g40 mm844749

SWEEP 7

STICH 7 – Kerb- und Reliefschnitzarbeiten, für Figurenarbeiten

SWEEP 8

SWEEP 8 - Chip carving and relief work, statues Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades HohleisenStraight Gouge5208 0244 g2 mm916446 Gerades HohleisenStraight Gouge5208 0344 g3 mm916453 Gerades HohleisenStraight Gouge5208 0444 g4 mm916460 Gerades HohleisenStraight Gouge5208 0545 g5 mm916477 Gerades HohleisenStraight Gouge5208 0647 g6 mm916484 Gerades HohleisenStraight Gouge5208 0848 g8 mm916491 Gerades HohleisenStraight Gouge5208 1055 g10 mm916507 Gerades HohleisenStraight Gouge5208 1270 g12 mm916514 Gerades HohleisenStraight Gouge5208 1467 g14 mm916521 Gerades HohleisenStraight Gouge5208 1676 g16 mm916538 Gerades HohleisenStraight Gouge5208 1883 g18 mm916545 Gerades HohleisenStraight Gouge5208 2097 g20 mm916552 Gerades HohleisenStraight Gouge5208 25123 g25 mm916569 Gerades HohleisenStraight Gouge5208 30146 g30 mm916576 Gerades HohleisenStraight Gouge5208 35181 g35 mm916583 Gerades HohleisenStraight Gouge5208 40185 g40 mm916590 Gerades HohleisenStraight Gouge5208 50302 g50 mm916606 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 0242 g2 mm916613 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 0445 g4 mm916620 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 0647 g6 mm916637 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 0846 g8 mm916644 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 1054 g10 mm916651 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 1259 g12 mm916668 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 1465 g14 mm916675 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 1680 g16 mm916682 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 2093 g20 mm916699 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 25133 g25 mm916705 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 30151 g30 mm916712 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 35280 g35 mm844732 Verkehrt gekr?pftes HohleisenBack bent Gouge5238 40300 g40 mm844725

SWEEP 8

STICH 8 – Kerb- und Reliefschnitzarbeiten, für Figurenarbeiten

SWEEP 9

SWEEP 9 - statues, definition work Beschreibung DeutschBeschreibung EnglischArtikelnummerGewicht gGröße mmForm DesignEAN 9002793Stich Sweep Gerades HohleisenStraight Gouge5209 0238 g2 mm916729 Gerades HohleisenStraight Gouge5209 0343 g3 mm916736 Gerades HohleisenStraight Gouge5209 0443 g4 mm506166 Gerades HohleisenStraight Gouge5209 0543 g5 mm916743 Gerades HohleisenStraight Gouge5209 0645 g6 mm506173 Gerades HohleisenStraight Gouge5209 0850 g8 mm506180 Gerades HohleisenStraight Gouge5209 1058 g10 mm506197 Gerades HohleisenStraight Gouge5209 1263 g12 mm916750 Gerades HohleisenStraight Gouge5209 1474 g14 mm506203 Gerades HohleisenStraight Gouge5209 1687 g16 mm916767 Gerades HohleisenStraight Gouge5209 1891 g18 mm916774 Gerades HohleisenStraight Gouge5209 2093 g20 mm506210 Gerades HohleisenStraight Gouge5209 25126 g25 mm916781 Gerades HohleisenStraight Gouge5209 30161 g30 mm506227 Gerades HohleisenStraight Gouge5209 35179 g35 mm916798 Gerades HohleisenStraight Gouge5209 40265 g40 mm916804 Gerades HohleisenStraight Gouge5209 50325 g50 mm916811 Gebogenes HohleisenBent Gouge5218 0243 g2 mm916828 Gebogenes HohleisenBent Gouge5218 0343 g3 mm916835 Gebogenes HohleisenBent Gouge5218 0443 g4 mm916842 Gebogenes HohleisenBent Gouge5218 0545 g5 mm916859 Gebogenes HohleisenBent Gouge5218 0646 g6 mm916873 Gebogenes HohleisenBent Gouge5218 0854 g8 mm916866 Gebogenes HohleisenBent Gouge5218 1056 g10 mm916880 Gebogenes HohleisenBent Gouge5218 1261 g12 mm916897 Gebogenes HohleisenBent Gouge5218 1472 g14 mm916903 Gebogenes HohleisenBent Gouge5218 1681 g16 mm916910 Gebogenes HohleisenBent Gouge5218 2091 g20 mm916927 Gebogenes HohleisenBent Gouge5218 25143 g25 mm506326 Gekr?pftes HohleisenSpoon Gouge5230 0241 g2 mm916934 Gekr?pftes HohleisenSpoon Gouge5230 0442 g4 mm916941 Gekr?pftes HohleisenSpoon Gouge5230 0660 g6 mm506357 Gekr?pftes HohleisenSpoon Gouge5230 0853 g8 mm916958 Gekr?pftes HohleisenSpoon Gouge5230 1054 g10 mm916965 Gekr?pftes HohleisenSpoon Gouge5230 1260 g12 mm916972 Gekr?pftes HohleisenSpoon Gouge5230 1476 g14 mm916989 Gekr?pftes HohleisenSpoon Gouge5230 1683 g16 mm916996 Gekr?pftes HohleisenSpoon Gouge5230 20110 g20 mm917009 Gekr?pftes HohleisenSpoon Gouge5230 25148 g25 mm917016 Gekr?pftes HohleisenSpoon Gouge5230 30170 g30 mm917023

SWEEP 9

STICH 9 – für Figurenarbeiten, Darstellung von welligem Haar und Wasser